Table of Contents
Advertisement
Tips
• This monitor supports the Portrait/Landscape display. This function allows you to change the orientation of
the Adjustment menu when using the monitor screen in vertical display position. (Refer to
Orientation of the Adjustment Menu" (page
• For using the monitor with "Portrait" position, the graphics board supporting portrait display is required. When
using the monitor with "Portrait" position, the setting needs to be changed depending on the graphics board used
in your PC. Refer to the manual of the graphics board for details.
1-2. Buttons and Indicators
Adjustment menu (ScreenManager
1
2
3
4
1
Input Signal Selection
button
2
Mode button
3
Enter button
4
Control buttons
(Left, Down, Up, Right)
5
Power button
6
Power indicator
7
Stand
8
Security lock slot
9
Input signal connectors
10
USB port (UP)
11
USB port (DOWN)
is an EIZO's nickname of the Adjustment menu.
®
*ScreenManager
22).)
*)
®
5
6
9
10
Switches input signals for display when two PCs are connected to the monitor.
Displays the Fine Contrast menu.
Displays the Adjustment menu, determines an item on the menu screen, and saves
values adjusted.
Chooses an adjustment item or increases/decreases adjusted values for advanced
adjustments using the Adjustment menu.
Turns the power on or off.
Indicates monitor's operation status.
Blue: Operating Orange: Power saving
When the timer is set for ColorNavigator, notifies that a recalibration is required (for
CAL mode or EMU mode).
Used to adjust the height of the monitor.
Complies with Kensington's MicroSaver security system.
Left: DVI-D connector (SIGNAL1 DUAL LINK) / Right: DVI-D connector (SIGNAL2)
Connects the USB cable in order to use the provided software.
Connects peripheral USB devices.
"3-8. Setting the
7
12
8
11
Off: Power off
1. Introduction
7
Advertisement
Table of Contents
