Table of Contents
Advertisement
4. Troubleshooting
Problems
3. Characters are blurred.
4.The screen is too bright or too dark.
5.Afterimages appear.
6.Green/red/blue/white dots or defective dots remain on
the screen.
7.Interference patterns or fingerprints remain on the
screen.
8.Noise appears on the screen.
9.The display image is appeared in lengthwise.
10.The <Smoothing> icon on the Adjustment menu
<Screen> cannot be selected.
11.The Main menu of Adjustment menu does not start.
12.The FineContrast mode is not displayed.
13.PC is hung up. / The peripherals connected to the
downstream ports do not operate.
14.USB function cannot be setup.
24
Possible cause and remedy
• Adjust using <Smoothing> (page
• Adjust <Brightness>. (The LCD monitor backlight has
a fixed life span. When the screen becomes dark or
begins to flicker, contact your local dealer.)
• Afterimages are particular to LCD monitors. Avoid
displaying the same image for a long time.
• Use the screen saver or power save function to avoid
displaying the same image for extended periods of
time..
• This is due to LCD panel characteristics and is not a
failure.
• Leave the monitor with a white screen or a black
screen. The symptom may disappear.
• When entering the signals of HDCP system, the normal
images may not be displayed immediately.
• Check whether the kind of cables connected with the
monitor and the PC.
• Smoothing setting may not be required depending
on the display resolution. (You cannot choose the
smoothing icon.
• Check for Adjustment Lock function (page
• Check for Adjustment Lock function (page
• Check that the USB cable is correctly connected.
• Check the downstream ports by connecting the
peripherals to other downstream ports. If the problem is
solved by doing this, contact an EIZO dealel (For details,
refer to the manual of the PC).
• Try executing the following method.
•Restarting the PC
•Connecting the PC and peripherals directly
•If the problem is solved by doing this, contact an EIZO
dealer.
• Check that the USB cable is correctly connected.
• Check that the PC and OS are USB compliant (For
verification of USB support, consult the manufacturer of
each system).
• Check the PC's BIOS setting for USB (For details, refer
to the manual of the PC).
21).
20).
20).
Advertisement
Table of Contents
