Nortel DMS-100 Series Maintenance Manual page 484

8-144 OPM card replacement procedures
NT6X51
in an OPM
(continued)
9
10
At the OPM frame
11
At the MAP display
12
13
14
15
297-8361-550 Standard 04.01 September 2000
If
load passed
load failed
Determine the type of device on which the PM load files are located.
If load files are located on
tape
IOC disk
SLM disk
Locate the tape that contains the PM load files.
Mount the tape on a magnetic tape drive.
Download the tape by typing
>MOUNT tape_no
and pressing the Enter key.
where
tape_no
is the number of the tape drive containing the PM load files
List the contents of the tape in your user directory by typing
>LIST T tape_no
and pressing the Enter key.
where
tape_no
is the number of the tape drive containing the PM load files.
Demount the tape drive by typing
>DEMOUNT T tape_no
and pressing the Enter key.
where
tape_no
is the number of the tape drive containing the PM load files
Go to step 26.
Do
step 27
step 30
Do
step 10
step 16
step 21