Nortel DMS-100 Series Maintenance Manual page 470

8-130 OPM card replacement procedures
NT6X47
in an OPM HIE
At the MAP terminal
7
8
9
10
At the MAP terminal
11
12
13
297-8361-550 Standard 04.01 September 2000
(continued)
Load the ESA processor by typing
>LOADPM
and pressing the Enter key.
If
message "loadfile not found in
directory" is received
load passed
load failed
Determine the type of device on which the PM load files are located.
If load files are located on
tape
IOC disk
SLM disk
Locate the tape that contains the PM load files.
Mount the tape on a magnetic tape drive.
Download the tape by typing
>MOUNT tape_no
and pressing the Enter key.
where
tape_no
is the number of the tape drive containing the PM load files
List the contents of the tape in your user directory by typing
>LIST T tape_no
and pressing the Enter key.
where
tape_no
is the number of the tape drive containing the PM load files
Demount the tape by typing
>DEMOUNT T tape_no
and pressing the Enter key.
Do
step 8
step 26
step 29
Do
step 9
step 15
step 20