Nortel DMS-100 Series Maintenance Manual page 479

If LCM unit
is not ManB
20 Post the LCM by typing
>POST LCM site frame lcm
and pressing the Enter key.
where
site
is the site name of the OPM (alphanumeric)
frame
is the frame number of the OPM (0 to 511)
lcm
is the number of the LCM
21 Return the busied unit to service by typing
>RTS UNIT lcm_unit
and pressing the Enter key.
where
lcm_unit
is the OPM unit busied in step 10
If RTS
failed
passed
22 Send any faulty cards for repair according to local procedure.
23 Record the following items in office records:
• date the card was replaced
• serial number of the card
• symptoms that prompted replacement of the card
Proceed to step 25.
24 Obtain further assistance in replacing this card by contacting the personnel
responsible for higher level of support.
25 You have successfully completed this procedure. Return to the maintenance
procedure that directed you to this card replacement procedure and continue
as directed.
OPM card replacement procedures
DMS-100 Family OPM Maintenance Manual XPM14 and up
in an OPM HIE
Do
step 22
Do
step 24
step 22
8-139
NT6X50
(end)