FujiFilm FinePix F30 Service Manual page 59

FinePix F30 Service Manual
<Step 2>
Flash memory reset (EVR)
< Attention >
When the MAIN PWB ASSY has been replaced, always reset
the flash memory before making any other adjustments.
Only reset the flash memory when the MAIN PWB ASSY
has been replaced. If the flash memory is reset when the
MAIN PWB ASSY has not been replaced, all the adjusted data
reverts to the default settings. In this event, adjust all the
settings. (Excludes firmware downloading.)
Enter [RESET] from the PC keyboard.
R E S E T
Input is completed.
Press the "Enter" key to reset the flash memory.
-->Once the flash memory reset has been completed successfully, the [End flash memory reset] screen appears.
<Step 3>
Flash Memory Reset is completed
(1) Remove the DC jack cable from the camera.
(2) Press the [Enter] key.
4. Adjustments
<Fig. 4-8-2>
<Fig. 4-8-3>
59