FujiFilm FinePix F30 Service Manual
  1. Manuals
  2. Brands
  3. FujiFilm Manuals
  4. Digital Camera
  5. FinePix F30
  6. Service manual

FujiFilm FinePix F30 Service Manual

Hide thumbs Also See for FinePix F30:
Table of Contents

Advertisement

Quick Links

Download this manual
BECAUSE THIS PRODUCTIS RoHS LEAD-FREE COMPLIANT, USE THE DESIG-
NATED AFTER-SELES PARTS AND THE DESIGNATED LEAD-FREE SOLDER WHEN
PERFORMING REPAIRS. (Refer to page 3 to page 5)
THE COMPONENTS IDENTIFIED WITH THE MARK "
DIAGRAM AND IN THE PARTS LIST ARE CRITICAL FOR SAFETY.
PLEASE REPLACE ONLY WITH THE COMPONENTS SPECIFIED ON THE SCHEMATIC
DIAGRAM AND IN THE PARTS LIST.
IF YOU USE PARTS NOT SPECIFIED, IT MAY RESULT IN A FIRE AND AN
ELECTRICAL SHOCK.
FUJI PHOTO FILM CO., LTD.
CAUTION
WARNING
DIGITAL CAMERA
FinePix F30
SERVICE MANUAL
US/EU/EG/EE/AS/CH-Model
" ON THE SCHEMATIC
Ref.No.:ZM00636-100
Printed in Japan 2006.05

Advertisement

Table of Contents
loading

Related Manuals for FujiFilm FinePix F30

Summary of Contents for FujiFilm FinePix F30

  • Page 1 DIGITAL CAMERA FinePix F30 SERVICE MANUAL US/EU/EG/EE/AS/CH-Model CAUTION BECAUSE THIS PRODUCTIS RoHS LEAD-FREE COMPLIANT, USE THE DESIG- NATED AFTER-SELES PARTS AND THE DESIGNATED LEAD-FREE SOLDER WHEN PERFORMING REPAIRS. (Refer to page 3 to page 5) WARNING THE COMPONENTS IDENTIFIED WITH THE MARK “...
  • Page 2 FinePix F30 Service Manual SAFETY CHECK-OUT After correcting the original problem, perform the following safety check before return the product to the customer. 1. Check the area of your repair for unsoldered or poorly CAUTION: FOR CONTINUED soldered connections. Check the entire board surface PROTECTION AGAINST FIRE for solder splasher and bridges.
  • Page 3 FinePix F30 Service Manual RoHS lead-free compliance Because this product is RoHS lead-free compliant, use the designated after-sales parts and the designated lead-free solder when performing repairs. <Background & Overview> With the exception of parts and materials expressly excluded from the RoHS directive (*1), all the internal connections and component parts and materials used in this product are lead-free compliant (*2) under the European RoHS directive.
  • Page 4 FinePix F30 Service Manual Setting temperature during lead-free soldering • Lead-free solder melting temperature The melting point of eutectic (Sn-Pb) solder is 183°C, while the melting point of lead-free solder (Sn-Ag-Cu) is 30°C higher at 220°C. • Soldering iron tip temperature The temperature setting for the soldering iron used should be such that the tip of the soldering iron is at the correct bonding temperature for the connection.
  • Page 5 FinePix F30 Service Manual Solder wire (thread) Use the lead-free solders specified below. Solder type: Sn96.5Ag3Cu0.5 (Displayed symbol: SnAgCu) Wire diameter: 0.6, 0.8 or 1.0 mm Sample: lead-free Wire diameter 0.8mm Solder type (Displayed symbol) SnAgCu Flux Conventional flux can be used.
  • Page 6 FinePix F30 Service Manual MEMO...

  • Page 7: Table Of Contents

    CONTENTS FinePix F30 Service Manual CONTENTS 1. General ............8 4. Adjustments ..........47 1-1. Product specification ..........8 4-1. Important point before Adjustment ....... 47 1-2. Explanation of Terms ..........11 4-1-1. The handling of image files in internal 1-3.

  • Page 8: General

    1. General FinePix F30 Service Manual 1. General 1-1. Product specification System Model Digital camera FinePix F30 Effective pixels 6.3 million pixels 1/1.7-inch Super CCD HR Storage media Internal memory (approx. 10 MB)/xD-Picture Card (16/32/64/128/256/512 MB/1 GB) File format Still image: DCF-compliant Compressed: Exif ver.2.2 JPEG, DPOF-compatible...
  • Page 9 1. General FinePix F30 Service Manual System Flash type Auto flash Effective range: ( : AUTO): Wide-angle: approx. 60 cm-6.5 m (2.0 ft.-21.3 ft.) Telephoto: approx. 60 cm-3.5 m (2.0 ft.-11.5 ft.) Macro: approx. 30 cm-80 cm (1.0 ft.-2.6 ft.)
  • Page 10 Accessories included Rechargeable Battery NP-95 (1) Strap (1) AC Power Adapter AC-5VC (1 set) A/V cable for FinePix F30 (1) Including plug to pin-plug ×2 USB cable for FinePix F30 (1) CD-ROM (1) Software for FinePix CX Owner’s Manual (1)

  • Page 11: Explanation Of Terms

    1. General FinePix F30 Service Manual 1-2. Explanation of Terms A number denotes Exposure Value. The EV is determined by the brightness of the subject and sensitivity (speed) of the film or CCD. The number is larger for bright subjects and smaller for dark subjects.

  • Page 12: Names Of External Components

    1. General FinePix F30 Service Manual 1-3. Names of External Components POWER button Flash Shutter button AF-assist illuminator Self-timer lamp Mode dial Terminal cover Lens (lens cover) Microphone A/V OUT (Audio/ Visual output) socket USB socket DC IN 5V socket...

  • Page 13: Disassembly

    2. Disassembly FinePix F30 Service Manual 2. Disassembly 2-1. Names of internal Components GUM KEY KEY FPC R PANEL ASSY LCD CONST FRAME REAR MAIN PWB ASSY FLASH CONST BATTERY HOLDER ASSY SPEAKER ASSY OPE UNIT E CAP LENS ASSY...

  • Page 14: Removing The R Panel Const

    2. Disassembly FinePix F30 Service Manual 2-2. Removing the R PANEL CONST (1) Remove the 2 special screws (M1.7 x 2.5). (2) Remove the 3 screws (M1.7 x 3.0). (3) Remove the 2 screws (M1.7 x 4.0). (4) Lift off the R PANEL CONST in the direction of the arrow.

  • Page 15: Disassembling The R Panel Const

    2. Disassembly FinePix F30 Service Manual 2-3. Disassembling the R PANEL CONST (1) Peel off the EMI SHEET. (2) Peel off the UL TAPE. (3) Peel off the TR SHEET. (4) Remove the 8 screws (M1.4 x 2.5). (5) Remove the REAR FRAME.

  • Page 16: Removing The Main Pwb Assy

    2. Disassembly FinePix F30 Service Manual 2-4. Removing the MAIN PWB ASSY (1) Remove the SHEET (PWB). (2) Discharge the main capacitor. Take care not to touch the main capacitor terminals before discharging the capacitor. (3) Unlock the connector and remove the LENS FPC.

  • Page 17: Removing The Flash Const

    2. Disassembly FinePix F30 Service Manual 2-5. Removing the FLASH CONST (1) Remove the solder on the MAIN PWB ASSY (2 locations) and remove the LED. (2) Remove the solder on the MAIN PWB ASSY (2 locations) and remove the LEAD C.CAP.

  • Page 18: Removing The Battery Holder Assy

    2. Disassembly FinePix F30 Service Manual 2-7. Removing the BATTERY HOLDER ASSY (1) Remove the BATTERY HOLDER ASSY in the direction of the arrow. [Notes on Assembly] Run the SPEAKER ASSY • MIC ASSY leads along the BATTERY HOLDER groove.

  • Page 19: Specifications For The Sheet Component Attachment Locations

    2. Disassembly FinePix F30 Service Manual 2-9. Specifications for the sheet component attachment locations 2-9-1. Affixing the SHEET (PWB) to the MAIN PWB ASSY. Affix the sheet so that it completely covers the specified area, with the top and left sides securely folded back and stuck in place.

  • Page 20: Affixing The Ul Tape To The Lead E.cap

    2. Disassembly FinePix F30 Service Manual 2-9-3. Affixing the UL TAPE to the LEAD E.CAP. Cut the UL TAPE to a size of 19 mm x 13 ± 2 mm and stick it onto the LEAD E.CAP so that it covers the section adjacent...

  • Page 21: Schematics

    3. Schematics FinePix F30 Service Manual 3. Schematics 3-1. Cautions <Cautions when replacing parts> • Do not reuse removed parts. Always use new parts. • Note that the negative side of tantalum condensers is readily damaged by heat. • Except for chemical condensers and tantalum condensers, voltage is not displayed on condensers with a voltage resistance of 50V or less.

  • Page 22: Description Of Main Block Functions

    The new RP Processor II featuring enhanced double noise reduction lets users take full advantage of the phenomenal ISO 3200 sensitivity of the FinePix F30. Other improvements include “Intelligent Flash” and upgraded signal processing for more accurate color reproduction.

  • Page 23: Block Diagram

    3. Schematics FinePix F30 Service Manual 3-4. Block Diagram MAIN PWB BLOCK D3.3V LED Drv Series IC201 FLASH TK60022AM4 AF_LED_ON 128Mbit (NAND) xD Card MC-10036F1 xD Card (SELF TIMER) 3.5V MDA_ON Slot HA-CCD(HR) 3xZOOM LENS BCS_MCM AD9926 IBFC CARD BUS...

  • Page 24: Overall Connection Diagram

    3. Schematics FinePix F30 Service Manual 3-5. Overall connection Diagram...

  • Page 25: Circuit Diagrams

    3. Schematics FinePix F30 Service Manual 3-6. Circuit Diagrams 3-6-1. CAMERA BLOCK...

  • Page 26: Dc/Dc Block

    3. Schematics FinePix F30 Service Manual 3-6-2. DC/DC BLOCK...

  • Page 27: Flash Block

    3. Schematics FinePix F30 Service Manual 3-6-3. FLASH BLOCK...

  • Page 28: Key Block

    3. Schematics FinePix F30 Service Manual 3-6-4. KEY BLOCK...

  • Page 29: Lcd Block

    3. Schematics FinePix F30 Service Manual 3-6-5. LCD BLOCK...

  • Page 30: Motor Block

    3. Schematics FinePix F30 Service Manual 3-6-6. MOTOR BLOCK...

  • Page 31: Pmg Block

    3. Schematics FinePix F30 Service Manual 3-6-7. PMG BLOCK...

  • Page 32: Process Block (Io)

    3. Schematics FinePix F30 Service Manual 3-6-8. PROCESS BLOCK (IO)

  • Page 33: Process Block (Pw)

    3. Schematics FinePix F30 Service Manual 3-6-9. PROCESS BLOCK (PW)

  • Page 34: Process Block (Sys)

    3. Schematics FinePix F30 Service Manual 3-6-10. PROCESS BLOCK (SYS)

  • Page 35: Audio Block

    3. Schematics FinePix F30 Service Manual 3-6-11. AUDIO BLOCK...

  • Page 36: Ccd Fpc Block

    3. Schematics FinePix F30 Service Manual 3-6-12. CCD FPC BLOCK...

  • Page 37: Chg Block

    3. Schematics FinePix F30 Service Manual 3-6-13. CHG BLOCK...

  • Page 38: Io Block

    3. Schematics FinePix F30 Service Manual 3-6-14. IO BLOCK...

  • Page 39: Led Block

    3. Schematics FinePix F30 Service Manual 3-6-15. LED BLOCK 3-6-16. MEDIA BLOCK...

  • Page 40: Video Block

    3. Schematics FinePix F30 Service Manual 3-6-17. VIDEO BLOCK...
  • Page 41 3. Schematics FinePix F30 Service Manual MEMO...

  • Page 42: Mounted Parts Diagrams

    3. Schematics FinePix F30 Service Manual 3-7. Mounted Parts Diagrams 3-7-1. CCD FPC ASSY <SIDE A>...
  • Page 43 3. Schematics FinePix F30 Service Manual <SIDE B>...
  • Page 44 3. Schematics FinePix F30 Service Manual MEMO...

  • Page 45: Main Pwb Assy

    3. Schematics FinePix F30 Service Manual 3-7-2. MAIN PWB ASSY...
  • Page 46 3. Schematics FinePix F30 Service Manual MEMO...

  • Page 47: Adjustments

    4. Adjustments FinePix F30 Service Manual 4. Adjustments 4-1. Important point before Adjustment 4-1-1. The handling of image files in internal memory Image files contained in the internal memory should be handled as described below. <Procedure for handling images> When either of following work is necessary, as many as possible of the image files should be extracted from the camera's internal memory and then written into the internal memory in the repaired or replacement camera before the camera is returned to the customer.

  • Page 48: Adjustment When Replacing Major Parts

    4. Adjustments FinePix F30 Service Manual 4-1-2. Adjustment when Replacing Major Parts Adjust the item shown by in the table below at the part replacement of LENS ASSY, MAIN PWB, LCD (Other part replacements need not be adjusted.) Replacing parts...

  • Page 49: Calibration Method Of Pattern Box

    Common with the FinePix E500 AC Adapter (AC-5V) General adjustment Accessory sold in the market *1: Differs from bundled cable of FinePix F30. *2: Please downloaded from Web server (http://fujifilm-di.intranets.com/). *3: Select one the power cable suitable each country. 4-4.

  • Page 50: Adjustment Software Installation

    4. Adjustments FinePix F30 Service Manual 4-5. Adjustment software installation 4-5-1. Various downloading software decompressions, preservation methods, and notes The PC adjustment softwares are in a specified Web server, and both of these are the compression of ZIP form files.

  • Page 51: Installation Of Dsc Jig Driver

    4. Adjustments FinePix F30 Service Manual 4-5-2. Installation of DSC jig driver * Since this camera uses the USB for communications with the personal computer, in order to start the PC adjustment software, [the DSC jig driver] needs to be installed in the personal computer beforehand.

  • Page 52: Initial Settings Of The Adjustment Software

    4. Adjustments FinePix F30 Service Manual 4-6. Initial Settings of the Adjustment Software * The initial settings are already written in the "FFW.ini" file, therefore perform the following procedure to the letter. Note that, if you change file names, the software will not start up.
  • Page 53 4. Adjustments FinePix F30 Service Manual <Step 3> Select the "EVR & Comm." tab ([1] in Fig. 4-6-3) in the "Customize" dialog box that appears. Set the "EVR" items ([2] in Fig. 8) as follows. Item Details etc (-V2) Check...
  • Page 54 Cautions When Adjusting Menu Command Details Operation Start Program start *1) FinePix F30 cannot adjust the EVR data reading and Stop Program stop writing.(Details are right tables.) Temporary stop Temporary program stop Step 0 Do not use *2) End Setting returns the camera from the Jig mode to Terminate program the Product Mode.

  • Page 55: Starting The Adjustment Software

    <Fig. 4-7-2> —> The [Cautions When Using the Adjustment Software] screen appears. <Step 3> Cautions When Using the FinePix F30 Adjustment Software 1. Adjust as follows after replacing parts. [F1]Battery [F3]LCD [F4]CCD data [F5]Camera [F6]AF [F7]Flash [F8]Firmware Download [F11]Video [F12]End Setting | –...
  • Page 56 4. Adjustments FinePix F30 Service Manual <Step 4> FinePix F30 Jig Mode Setup Screen 1. Set the Jig mode by using [FxF30 Battery jig (3.7V)]. 2. Set the Jig mode by using [Power cable jig (5V)]. 1) Set the mode to the Photography mode.
  • Page 57 4. Adjustments FinePix F30 Service Manual <Step 6> FinePix F30_W adjustment item select screen 0. [ R ] : Flash memory reset *Only use for when the MAIN PWB has been replaced. 1. [ F 4 ] : CCD Defect Correction / OFD Adjustment 2.

  • Page 58: R] : Flash Memory Reset

    4. Adjustments FinePix F30 Service Manual 4-8. [R] : Flash Memory Reset <Note> Only reset the flash memory when the MAIN PWB ASSY has been replaced. When the MAIN PWB ASSY has been replaced, always reset the flash memory before making any other adjustments.
  • Page 59 4. Adjustments FinePix F30 Service Manual <Step 2> Flash memory reset (EVR) < Attention > When the MAIN PWB ASSY has been replaced, always reset the flash memory before making any other adjustments. Only reset the flash memory when the MAIN PWB ASSY has been replaced.

  • Page 60: F4] : Ccd Defect Correction/Ofd Adjustment

    4. Adjustments FinePix F30 Service Manual 4-9. [F4] : CCD Defect Correction/OFD Adjustment CCD data is required when the CCD PWB or LENS ASSY or MAIN PWB ASSY is replaced. [Method of acquiring CCD data] 1. When you exchange CCD PWB -->...
  • Page 61 4. Adjustments FinePix F30 Service Manual < Use the pattern box for Camera adjustment > Turn on the power supply in the pattern box. Afterwards, wait for about ten minutes so that the source of light may stabilize. Pattern BOX...
  • Page 62 4. Adjustments FinePix F30 Service Manual <Step 3> 50020520 CCD data < Preparations > (1) Enter the 8-digit ccdserial number in the CCD data dialog box. The file extrension need not be entered. (2) Insert the floppy disk in the A: drive (floppy disk drive) on the PC.
  • Page 63 4. Adjustments FinePix F30 Service Manual <Step 4> CCD data is completed. Press the [Enter] key to return to the Adjustment Item Selection Screen. <Fig. 4-9-4>...

  • Page 64: F5] : Camera Adjustment

    4. Adjustments FinePix F30 Service Manual 4-10. [F5] : Camera Adjustment (shutter adjustment, adjustment for reduced aperture sensitivity, ISO sensitivity adjustment, white balance adjustment, AE adjustment, offset level adjustment, Shading adjustment) < Setup for Camera Adjustment> Finish the calibration of the pattern box before Camera adjustment.
  • Page 65 4. Adjustments FinePix F30 Service Manual <Step 1> Select [F5] Camera Adjustment on the [Adjustment Items Select] screen. --> The [Camera Adjustment Preparation] screen appears. <Step 2> Run the adjustment in accordance with the instructions on the screen. Camera adjustment <...
  • Page 66 4. Adjustments FinePix F30 Service Manual <Step 4> Squeezing sensitivity decrease rate adjustment (1) Set the distance between the camera and pattern box. (2) Place the LB140 filter in front of the lens. When preparations are complete, press the [Enter] key.
  • Page 67 4. Adjustments FinePix F30 Service Manual <Step 6> WB adjustment with filter (1) Set the distance between the camera and pattern box. (2) Place the LB140 filter in front of the lens. When preparations are complete, press the [Enter] key.
  • Page 68 4. Adjustments FinePix F30 Service Manual <Step 8> WB adjustment with filter (1) Set the distance between the camera and pattern box. (2) Place the LB140 filter in front of the lens. When preparations are complete, press the [Enter] key.
  • Page 69 4. Adjustments FinePix F30 Service Manual <Step 10> Transfer efficiency adjustment (1) Set the distance between the camera and pattern box. (2) Place the LB140 filter in front of the lens. When preparations are complete, press the [Enter] key. LB140 filter...

  • Page 70: F6] : Af Adjustment

    4. Adjustments FinePix F30 Service Manual 4-11. [F6] : AF Adjustment <Setup for AF Adjustment> (1) Adjust the distance between the Siemens star chart and the lens front of the camera to "611+-5mm" (2) Illuminate the AF chart with a light source. Ensure that the brightness at the surface of the AF chart is between 9.0 and 11.5EV.
  • Page 71 4. Adjustments FinePix F30 Service Manual <Step 3> AF Adjustment (1) Place the Siemens star chart at a distance of 611+-5mm from the lens-face of the conversion lens. (2) Place the conversion lens at a distance of 11+-2mm from the lens-face of the lens.
  • Page 72 4. Adjustments FinePix F30 Service Manual <Step 5> The AF adjustment is completed. Press the [Enter] key to return to the Adjustment Items Select Screen. <Fig. 4-11-4>...

  • Page 73: F7] : Flash Adjustment

    4. Adjustments FinePix F30 Service Manual 4-12. [F7] : Flash Adjustment <Setup for Flash Adjustment> (1) As flash adjustment is readily affected by external light, ensure that the vicinity of the gray chart is very dark. (2) Ensure that distance is measured from the front of the camera during flash adjustment.
  • Page 74 4. Adjustments FinePix F30 Service Manual <Step 3> Flash Adjustment (1) Adjust brightness so that the periphery of the gray chart is as dark as possible. (2) Adjust the camera so that the entire chart is shown on the LCD monitor.

  • Page 75: F1] : Battery Voltage Adjustment

    4. Adjustments FinePix F30 Service Manual 4-13. [F1] : Battery Voltage Adjustment <Setup for Flash Adjustment> (1) When adjusting the battery voltage, supply power (3.70V) to the camera from the [FxF30 Battery jig] before setting the jig mode. (2) Always measure input voltage in the vicinity of the DC IN terminal.
  • Page 76 4. Adjustments FinePix F30 Service Manual <Step 2> Run the adjustment in accordance with the instructions on the screen. Battery voltage adjustment <Preparations> 1. Check that the FxF30 Battery jig and the camera are connected. *If not, return to the Jig Mode Setup screen, and connect the FxF30 Battery jig and the camera.
  • Page 77 4. Adjustments FinePix F30 Service Manual <Step 4> Battery voltage adjustment (1) Supply 3.55V (+0.02V/-0.00V). When preparations are complete, press the [Enter] key. Result= (2) Supply 3.35V (+0.02V/-0.00V). When preparations are complete, press the [Enter] key. <Fig. 4-13-3> —> The [3.20V Input] screen appears.
  • Page 78 4. Adjustments FinePix F30 Service Manual <Step 6> Battery voltage adjustment (1) Supply 3.55V (+0.02V/-0.00V). When preparations are complete, press the [Enter] key. Result= (2) Supply 3.35V (+0.02V/-0.00V). When preparations are complete, press the [Enter] key. Result= (3) Supply 3.20V (+0.02V/-0.00V).

  • Page 79: F11] : Video Adjustment

    4. Adjustments FinePix F30 Service Manual 4-14. [F11] : Video Adjustment <Setup for Video Adjustment> (1) Set up the PCI-2746C board in the computer as explained in the instructions for the video adjustment jig. (2) If the waveform of the brightness signal (Y) or color signal (C) does not appear in the “WAVE No. 0” window during adjustments, check the connections of the video adjustment jig.
  • Page 80 4. Adjustments FinePix F30 Service Manual <Step 2> Run the adjustment in accordance with the instructions on the screen. Video adjustment < Video Adjustment Preparations > (1) Connect the USB cable with PC by using [Multi cable (AV/USB) for F30].

  • Page 81: F3] : Lcd Adjustment

    4. Adjustments FinePix F30 Service Manual 4-15. [F3] : LCD Adjustment <Setup for LCD Adjustment> (Set up the PCI-2747C board in the computer as explained in the instructions for the LCD adjustment Jig. PC for adjustments and checks Fine Pix F30...
  • Page 82 4. Adjustments FinePix F30 Service Manual <Step 3> LCD Adjustment < LCD Adjustment Preparations > (1) Adjust so that the center of the camera LCD monitor is in the LCD adjustment jig the sensor. (2) Ensure that the periphery is as dark as possible.

  • Page 83: F8] : Firmware Download

    4. Adjustments FinePix F30 Service Manual 4-16. [F8] : Firmware Download Attention : When the download of the firmware is needed, FUJI SERVICE BULLETIN is contacted from FTYO/QA. Till then, disregard this item. <Setup for Firmware Download> PC for adjustment and check...
  • Page 84 4. Adjustments FinePix F30 Service Manual <Step 2> Firmware download is completed (1) Remove the Power cable jig from the camera. (2) Turn off power switch. (3) Reconnect Power cable jig . (4) Switch camera power ON while pressing the shutter button.

  • Page 85: F12] : End Setting

    3. USB ID write details 1) USB ID write requires that the USB device (in this case FinePix F30) be unique throughout the world. For this reason, each device has a unique ID as determined by the USB standard. If multiple devices with the same USB ID are connected to a single PC, the PC will be unable to identify each USB device, thus preventing operation.
  • Page 86 4. Adjustments FinePix F30 Service Manual <Step 1> Select [F12] End Setting on the [Adjustment Items Select] screen. —> The [End Setting Description] screen appears. <Step 2> Run the adjustment in accordance with the instructions on the screen. End Setting...
  • Page 87 4. Adjustments FinePix F30 Service Manual <Step 4> Destination setting The destination is selected from an undermentioned list, according to third character from left side of the serial number. The third character <A> FinePix F30 J-model 0 to 9 <B> FinePix F30 US-model A to H,J,K <C>...
  • Page 88 <Step 6> USB ID Selected U.S.A.. Press the [Enter] key! <Fig. 4-17-5> —> The [FinePix F30 Adjustment End] screen appears. <Step 7> FinePix F30 Adjustment completed. 1) Remove USB cable from the camera. 2) Press the [Enter] key. --> The adjustment software returns to the Jig mode setup screen after press the [Enter] key.

  • Page 89: Inspection

    5. Inspection FinePix F30 Service Manual 5. Inspection 5-1. Required Measuring Equipment Measuring equipment Remarks Power supply AC adapter (AC-5V), Regurated power supply Digital voltmeter For general use Ammeter For general use (able to measure 1mA or less) FxF30 Battery jig...

  • Page 90: Inspection And Factory Settings

    5. Inspection FinePix F30 Service Manual 5-3. Inspection and Factory Settings Sequemnce Item Mode Preparations for adjustment Method of adjustment Measuring Measurement points (measurement points, subject, other) (VRs, waveforms, required values) equipment and jigs (VRs, positions) External visual (1) Observe the camera.
  • Page 91 5. Inspection FinePix F30 Service Manual Sequemnce Item Mode Preparations for adjustment Method of adjustment Measuring Measurement points (measurement points, subject, other) (VRs, waveforms, required values) equipment and jigs (VRs, positions) Movie/audio Movie (1) Select the mode dial to (1) Check that “STANDBY”...
  • Page 92 5. Inspection FinePix F30 Service Manual Sequemnce Item Mode Preparations for adjustment Method of adjustment Measuring Measurement points (measurement points, subject, other) (VRs, waveforms, required values) equipment and jigs (VRs, positions) Playback mode Playback (1) Insert card. check (2) Start up in playback mode.
  • Page 93 5. Inspection FinePix F30 Service Manual Sequemnce Item Mode Preparations for adjustment Method of adjustment Measuring Measurement points (measurement points, subject, other) (VRs, waveforms, required values) equipment and jigs (VRs, positions) Current Auto mode (1) Connect the power supply ZJ00979-100 consumption jig to the battery terminal.

  • Page 94: Parts List

    6. Parts List FinePix F30 Service Manual 6. Parts List 6-1. Packing and Accessories 6-1-1. US-model A111 A110 A107 A109 A118 A117 A121 A120 A105 A119 A102 A113 A104 A116 A112 A114 A106 A101 A115 A103 A108 Ref No. Parts No.

  • Page 95: Eu-Model

    6. Parts List FinePix F30 Service Manual 6-1-2. EU-model A107 A111 A110 A109 A124 A123 A122 A121 A105 A120 A119 A118 A117 A102 A113 A104 A116 A112 A114 A106 A101 A115 A103 A108 N.S.=Not Supply Ref No. Parts No. Description Comment Ref No.

  • Page 96: Eu-Model (Jp Production)

    6. Parts List FinePix F30 Service Manual 6-1-3. EU-model (JP Production) A107 A111 A110 A109 A124 A123 A122 A121 A105 A120 A119 A118 A117 A102 A113 A104 A116 A112 A114 A106 A101 A115 A103 A108 N.S.=Not Supply Ref No. Parts No.

  • Page 97: Eg-Model

    6. Parts List FinePix F30 Service Manual 6-1-4. EG-model A111 A110 A107 A109 A119 A118 A105 A117 A102 A113 A104 A116 A112 A114 A106 A101 A115 A103 A108 Ref No. Parts No. Description Comment A101 FZ06513-101 UNITARY BOX A102 FZ06517-100...

  • Page 98: Ee-Model

    6. Parts List FinePix F30 Service Manual 6-1-5. EE-model A111 A110 A107 A109 A118 A105 A117 A102 A113 A104 A116 A112 A114 A106 A101 A115 A103 A108 Ref No. Parts No. Description Comment A101 FZ06513-101 UNITARY BOX A102 FZ06517-100 PARTITION PAD...

  • Page 99: As-Model

    6. Parts List FinePix F30 Service Manual 6-1-6. AS-model A111 A110 A107 A109 A118 A105 A117 A102 A113 A104 A116 A112 A114 A106 A101 A115 A103 A108 Ref No. Parts No. Description Comment A101 FZ06513-101 UNITARY BOX A102 FZ06517-100 PARTITION PAD...

  • Page 100: As-Model (Jp Production)

    6. Parts List FinePix F30 Service Manual 6-1-7. AS-model (JP Production) A111 A110 A107 A109 A118 A105 A117 A102 A113 A104 A116 A112 A114 A106 A101 A115 A103 A108 Ref No. Parts No. Description Comment A101 FZ06513-101 UNITARY BOX A102...

  • Page 101: Model

    6. Parts List FinePix F30 Service Manual 6-1-8. CH-model A111 A110 A107 A109 A117 A105 A115 A102 A113 A116 A104 A112 A114 A106 A101 A103 A108 Ref No. Parts No. Description Comment A101 FZ06512-201 UNITARY BOX CH A102 FZ06551-100 PARTITION PAD...

  • Page 102: Model (Jp Production)

    6. Parts List FinePix F30 Service Manual 6-1-9. CH-model (JP Production) A111 A110 A107 A109 A117 A105 A115 A102 A113 A116 A104 A112 A114 A106 A101 A103 A108 Ref No. Parts No. Description Comment A101 FZ06512-400 UNITARY BOX CH(J) A102...

  • Page 103: Mecha Block

    6. Parts List FinePix F30 Service Manual 6-2. Mecha Block 6-2-1. US/AS-model M240 M207 M243 Ref No. Parts No. Description Comment M213 M226 M227 M201 BU03298-100 F PANEL ASSY M202 BB19383-100 GRIP F M209 M229 M203 BB19374-100 JACK COVER M208...

  • Page 104: Eu/Eg/Ee-Model

    6. Parts List FinePix F30 Service Manual 6-2-2. EU/EG/EE-model M240 M207 M243 Ref No. Parts No. Description Comment M213 M226 M227 M201 BU03298-100 F PANEL ASSY M202 BB19383-100 GRIP F M209 M229 M203 BB19374-100 JACK COVER M208 M204 FZ06573-100 OPE UNIT...

  • Page 105: Eu-Model (Jp Production)

    6. Parts List FinePix F30 Service Manual 6-2-3. EU-model (JP Production) M240 M207 M243 Ref No. Parts No. Description Comment M213 M226 M227 M201 BU03298-100 F PANEL ASSY M202 BB19383-100 GRIP F M209 M229 M203 BB19374-100 JACK COVER M208 M204...

  • Page 106: Model

    6. Parts List FinePix F30 Service Manual 6-2-4. CH-model M240 M207 M243 Ref No. Parts No. Description Comment M213 M226 M227 M201 BU03298-100 F PANEL ASSY M202 BB19383-100 GRIP F M209 M229 M203 BB19374-100 JACK COVER M208 M204 FZ06573-100 OPE UNIT...

  • Page 107: As/Ch-Model (Jp Production)

    6. Parts List FinePix F30 Service Manual 6-2-5. AS/CH-model (JP Production) M240 M207 M243 Ref No. Parts No. Description Comment M213 M226 M227 M201 BU03298-100 F PANEL ASSY M202 BB19383-100 GRIP F M209 M229 M203 BB19374-100 JACK COVER M208 M204...
  • Page 108 6. Parts List FinePix F30 Service Manual MEMO...

  • Page 109: Electrical Parts

    6. Parts List FinePix F30 Service Manual 6-3. Electrical parts [NOTE] The components indicated by mark are critical for safety. * Due to standardization, replacement in the parts list may be different from When indicated parts by reference number, please include the parts list specified in the circuit or the components used on the set.

  • Page 110: Appendix

    7. Appendix FinePix F30 Service Manual 7. Appendix 7-1. List of Related Technical Updates Issued To ensure that after-sales srevice is performed accuratety, keep a record here of the technical updates issued that cover this device. Technical Update No. Date...
  • Page 111 FUJI PHOTO FILM CO., LTD. 26-30, Nishiazabu 2-chome, Minato-ku, Tokyo 106-8620, Japan.

Table of Contents