FujiFilm FinePix F30 Service Manual page 76

4. Adjustments
<Step 2>
Run the adjustment in accordance with the instructions on the screen.
Battery voltage adjustment
<Preparations>
1. Check that the FxF30 Battery jig and the camera are connected.
*If not, return to the Jig Mode Setup screen,
and connect the FxF30 Battery jig and the camera.
2. Supply power (3.70V) to the camera from the
[FxF30 Battery jig ].
When preparations are complete, press the [Enter] key on the PC.
--> Lens is extended when the [Enter] key is pressed.
—> The [3.55V Input] screen appears.
<Step 3>
Battery voltage adjustment
(1) Supply 3.55V (+0.02V/-0.00V).
When preparations are complete, press the [Enter] key.
—> The [3.35V Input] screen appears.
76
FinePix F30 Service Manual
<Fig. 4-13-1>
<Fig. 4-13-2>