Denon DHT-1000DV Operating Instructions Manual page 27

(2) DSP Surround simulation
3 1, 2
2
CH
ON 1 2 3
POWER POWER VCR
CH
OFF 4 5 6
VCR POWER VCR POWER
CH VOL
CLEAR 7 8 9
TV
TV POWER TV POWER SLEEP
CH TV/VCR
CALL +10 0
DISPLAY RETURN INPUT MODE SURROUND
2
MENU FUNCTION
1
5 5
ENTER
MODE
VOLUME
BAND
MUTE
CH SHIFT
NTSC/PAL STATUS
TU MEMO
SUB TITLE AUDIO ANGLE TOP MENU
PROG/DIRECT REPEAT A-B REPEAT RANDOM
CH.SELECT T.TONE SDB/TONE SURR.PARA
4
SETUP CDR/MD/TAPE TUNER/TV/VCR DVD
REMOCON MODE
1
Select the input source.
FUNCTION
FUNCTION
/ SELECT
Main unit Remote control unit
2
Select the surround mode for the input channel.
SURROUND FUNCTION
SURROUND
MODE
/ SELECT
\
Main unit Main unit Remote control unit
• The surround mode switches in the following order
each time the SURROUND MODE button is pressed:
STEREO AUTO DECODE 5CH STEREO MONO MOVIE
ROCK ARENA JAZZ CLUB VIDEO GAME
MATRIX VIRTUAL DIRECT STEREO
3
Play a program source.
• Refer to instruction manual for handling.
4
To enter the surround parameter
setting mode, press the
SURROUND mode.
• The surround parameter
switches in the following order
each time the SURROUND
Remote control unit
button is pressed for the
different surround modes.
MONO MOVIE
ROCK ARENA
JAZZ CLUB
VIDEO GAME MATRIX
ROOM SIZE DELAY
EFFECT DEFAULT
DEFAULT
There is no 5-channel stereo mode.
Refer to page 28 for the parameters of the "AUTO
DECODE" mode.
5
Display the parameter you want to adjust,
• Use the cursor buttons ( ,
surround parameter.
Remote control unit
• ROOM SIZE setting
, /
• EFFECT LEVEL setting
, /
• DELAY TIME setting
...
, /
5
• DEFAULT setting
SURR.PARA
,
When "YES" is selected, the settings are reset to
their factory default values.
VIRTUAL
Stop operating buttons once the surround parameter
EFFECT
settings have been completed. After several seconds the
normal display reappears
DEFAULT
automatically set.
NOTE:
• When playing PCM digital signals or analog signals in the
5CH STEREO, ROCK ARENA, JAZZ CLUB, VIDEO
GAME, MONO MOVIE or MATRIX surround modes and
the input signal switches to a digital signal encoded in
) to select the
Dolby Digital, the Dolby surround mode switches
automatically. When the input signal switches to a DTS
signal, the mode automatically switches to DTS
surround.
Surround parameters (3)
ROOM SIZE:
• This sets the size of the sound field.
There are five settings: "small", "med.s" (medium-
small), "medium", "med.l" (medium-large) and
"large". "small" recreates a small sound field, "large"
/
a large sound field.
EFFECT LEVEL:
• This sets the strength of the surround effect.
The level can be set in 15 steps from 1 to 15. When
the surround mode is set to "VIRTUAL", the effect
level can be set in steps from 1 to 10. Lower the level
if the sound seems distorted.
DELAY TIME:
• In the matrix mode only, the delay time can be set
within the range of 0 to 110 ms.
and the settings are
ENGLISH
27