Denon DHT-1000DV Operating Instructions Manual page 25

6
• LFE level setting
... ...
, /
The LFE level can be adjusted between –10 dB and
0 dB in steps of 1 dB.
• DEFAULT setting
, /
When "YES" is selected, the settings are reset to
their factory default values.
Stop operating buttons once the surround parameter
settings have been completed. After several seconds the
normal display reappears and the settings
automatically set.
NOTES:
• When "DEFAULT" is selected and the cursor button
is pressed ("YES"), "D.COMP." is automatically set to
"OFF" and "LFE" is reset to the default value.
("D.COMP." is not valid for DTS source.)
• Signals encoded in Dolby Digital can only be played in
the Auto decode (Dolby Digital, Dolby Pro Logic II or
Auto stereo), Direct, stereo or virtual modes. Other
modes do not work when playing Dolby Digital signals.
• DTS signals can only be played in the Auto decode
(DTS), Direct or stereo modes. Other modes do not
work when playing DTS signals.
• DTS signals can also be played in the "DTS" input
mode. (See page 19.) In this case, decoding and
playback are only performed when DTS signals are
input.
Surround parameters (2)
D.COMP. (Dynamic Range Compression):
• This parameter adjusts the dynamic range of the
Dolby Digital sound. When listening with the volume
turned relatively low, at night for example, set this to
the "HI" side to lower the peak of the sound and
amplify the quieter sounds, narrowing the dynamic
range and making the sound easier to listen to. Set to
"OFF" to turn this function off.
OFF LOW MID
Dynamic range Wide
LFE (Low Frequency Effect):
• Program source and adjustment range
1. Dolby Digital: –10 dB to 0 dB
2. DTS Surround: –10 dB to 0 dB
• When Dolby Digital encoded software is played, it is
recommended that the LFE LEVEL be set to 0 dB for
correct Dolby Digital playback.
• When DTS encoded movie software is played, it is
recommended that the LFE LEVEL be set to 0 dB for
correct DTS playback.
• When DTS encoded music software is played, it is
recommended that the LFE LEVEL be set to –10 dB
for correct DTS playback.
are
[2] Playing in the Dolby Pro-Logic II mode ..............................................................................................................(All function)
• Playback is performed according to the 2-channel mode and PLII CINEMA, PLII MUSIC and PRO LOGIC mode parameter
settings.
• Applicable sources
• Digital inputs (TV/DBS and V.AUX functions, including DVD
playback discs)
Dolby Digital 2-channel sources
PCM 2-channel sources (except 96 kHz PCM)
• 2-channel analog input sources (all functions)
HI
Narrow
2, 3
CH
ON 1 2 3
POWER POWER CH
OFF 4 5 6
VCR POWER VCR POWER CH VOL
CLEAR 7 8 9
TV POWER TV POWER
CH TV/VCR SLEEP
CALL +10 0
DISPLAY RETURN INPUT MODE SURROUND
MENU FUNCTION
ENTER
MODE
VOLUME
BAND
MUTE
CH SHIFT
NTSC/PAL STATUS
TU MEMO
SUB TITLE ANGLE TOP MENU
AUDIO
PROG/DIRECT REPEAT A-B REPEAT RANDOM
CH.SELECT T.TONE SDB/TONE SURR.PARA
SETUP CDR/MD/TAPE TUNER/TV/VCR DVD
REMOCON MODE
1
Select the input function.
FUNCTION
/ SELECT
1, 2
Main unit
Dolby Pro Logic II playback is not possible in the
digital input function (DVD, TV/DBS or V.AUX)
"DTS" input mode.
2
2
Set the AUTO DECODE Surround mode.
SURROUND
MODE
\
VCR
TV
2
Main unit Main unit
1
If the mode is set to anything other than AUTO
DECODE, the AUTO DECODE mode can be set
using the AUTO DECODE/2CH MODE button on
the main unit.
3
Play a program source with the
mark or a 2-channel source.
• The source is played according to the Dolby Pro Logic
4
II mode setting.
• The Dolby Pro-Logic II indicator lights when in the
CINEMA and MUSIC modes.
• In the Dolby Pro-Logic mode, the Dolby Pro-Logic
indicator lights.
The mode can be changed during playback by
changing the 2-channel mode (surround parameter)
or by pressing the AUTO DECODE/2CH MODE
button.
4
Set the surround parameters
according to the selected mode.
Refer to steps 1 to 3 at
"Setting the parameters in the
PLII CINEMA, PLII MUSIC and
PRO LOGIC modes" (page
24).
ENGLISH
FUNCTION
Remote control unit
FUNCTION
SURROUND
/ SELECT
Remote control unit
Lit
PRO LOGIC II
Lit
PRO LOGIC
SURR.PARA
Remote control unit
25