Playback,; Operation - Denon DHT-1000DV Operating Instructions Manual

Before operating the remote control unit! DVD
• Be sure to set the DVD mode using the
remote control mode selector buttons.
(8)-1 (7)-1
(6) Forward / Reverse Searching
1 During playback, press one of the 6 / 7 buttons on
the remote control unit.
: Reverse direction
6
7 : Forward direction
• When pressed again, the search speed increases (in
four steps).
• Press the PLAY button to resume normal playback.
Remote control unit
NOTE:
• In some cases the menu screen may reappear when
one of the 6 / 7 buttons is pressed during
menu playback on a video CD.
(7) Skipping to the Beginning of Chapters or Tracks
1 During playback, press one of the skip buttons on the
main unit or the remote control unit.
8 : Reverse direction (PREVIOUS)
: Forward direction (NEXT)
9
• A number of chapters or tracks equal to the number
of times the button is pressed is skipped.
• When the skip back button is pressed once, the
pickup returns to the beginning of the currently
playing chapter or track.
CH
- TUNING +
Main unit Remote control unit
POWER
VCR POWER
TV POWER
DISPLAY RETURN INPUT MODE SURROUND
MENU FUNCTION
ENTER
MODE
VOLUME
BAND
(8)-1
(7)-1
MUTE
CH SHIFT
NTSC/PAL STATUS
(6)-1,(9)-1
TU MEMO
SUB TITLE AUDIO ANGLE TOP MENU
PROG/DIRECT REPEAT A-B REPEAT RANDOM
CH.SELECT T.TONE SDB/TONE SURR.PARA
SETUP CDR/MD/TAPE TUNER/TV/VCR DVD
REMOCON MODE
Playing position
Chapter/Track Chapter/Track Chapter/Track Chapter/Track
Reverse direction , / Forward direction (direction of playback)
NOTE:
• In some cases the menu screen may reappear when
one of the 8 / 9 buttons is pressed during
menu playback on a video CD.
(8) Playing Frame by Frame
(for DVDs and video CDs only) Tracks
1 During playback, press the 3 button on the main unit or
the remote control unit.
• The picture moves forward one frame each time the
button is pressed.
• Press the PLAY button to resume normal playback.
Main unit Remote control unit
(9) Slow Playback (for DVDs and video CDs only)
1 In the still mode, press one of the 6 / 7 buttons on
the remote control unit.
6 : Reverse direction
7 : Forward direction
• When pressed again, the slow play speed increases.
(Four steps) (Three steps on video CDs)
• Press the PLAY button to resume normal playback.
Remote control unit
NOTE:
• Reverse slow play is not possible on video CDs.
12

OPERATION

1, 3 5
3
Input mode setting
1 Either turn the FUNCTION/SELECT dial on the main unit
or press the FUNCTION button on the remote control
unit to select the input function to played.
FUNCTION
FUNCTION
/ SELECT
Main unit Remote control unit
• The function switches as shown below.
• The function only changes in the "Æ" direction when
operated from the remote control unit.
TUNER DVD TV/DBS
CDR/TAPE VCR V.AUX
2 When DVD, TV/DBS or V.AUX was selected as the
input function, press the remote control unit's INPUT
MODE button to select the input mode.
INPUT MODE
Remote control unit
AUTO PCM DTS ANALOG
• "ANALOG" cannot be selected when "DVD" was
selected as the input function.
Input mode selection function
• The input mode can be selected when the input
function is set to DVD, TV/DBS or V.AUX.
• Different input modes can be selected for each input
function. The selected input mode is stored in the
memory for the individual input functions.
• When the input function is set to something other
than the above, "ANALOG ONLY" is displayed and
the input mode cannot be selected.
q AUTO (auto mode)
In this mode, the type of signal being input to the
digital and analog input terminals is detected and
the program in the set's surround decoder is
switched automatically to play the signals for the
selected input function.
ENGLISH
POWER
CH
OFF 4 5 6
VCR POWER VCR POWER CH
VOL
CLEAR 7 8 9
TV
TV POWER TV POWER CH TV/VCR SLEEP
0
CALL +10
DISPLAY RETURN INPUT MODE SURROUND
3
2
MENU FUNCTION
1
ENTER
5
MODE
VOLUME
BAND
MUTE
CH SHIFT
The presence or absence of digital signals is
detected, the signals input to the digital input are
identified and decoding and playback are performed
automatically in DTS, Dolby Digital or PCM (2
channel stereo) format.
If no digital signal (TV/DBS and V.AUX) is being
input, the analog input jacks are selected.
Use this mode to play Dolby Digital signals.
w PCM (exclusive PCM signal playback mode)
Decoding and playback are only performed when
PCM signals are being input.
e DTS (exclusive DTS signal playback mode)
Decoding and playback are only performed when
DTS signals are being input.
r ANALOG (exclusive analog audio signal playback
mode)
The signals input to the analog input jacks are
played.
(This cannot be selected in the DVD mode.)
The input mode automatically switches to "AUTO"
if you switch the input function to DVD from
anything other than DVD.
3 Either press the SURROUND MODE button on the
main unit then turn the FUNCTION/SELECT dial or
press the SURROUND button on the remote control
unit to select the surround mode.
SURROUND
FUNCTION
SURROUND
MODE
/ SELECT
\
Main unit Main unit Remote control
unit
• The function switches as shown below.
• The function only changes in the "Æ" direction when
operated from the remote control unit.
STEREO AUTO DECODE 5CH STEREO MONO MOVIE
ROCK ARENA JAZZ CLUB VIDEO GAME
MATRIX VIRTUAL DIRECT STEREO
• The "AUTO DECODE" mode can be selected with
the AUTO DECODE button on the main unit, the
"5CH STEREO" mode with the 5CH STEREO button
on the main unit.
...
19