Length: Approx. 10 Meters E Foot - Denon DHT-1000DV Operating Instructions Manual

ENGLISH
[2] Setting the parameters in the PLII CINEMA, PLII MUSIC and PRO LOGIC modes
• When PLII CINEMA, PLII MUSIC or PRO LOGIC is selected in the 2-channel mode, more detailed parameters can also be set
for the different modes.
PLII MUSIC mode: Use the procedure described below to make the settings.
PLII CINEMA and PRO LOGIC modes: Refer to step 6 on pages 24 and 25.
• Program sources marked in parentheses
Pro-Logic II processing and played in the multi-channel mode.
q Cinema (PLII CINEMA) mode: This mode is suited for movies and other Dolby Surround programs.
w Music (PLII MUSIC) mode: This mode is suited for stereo music programs.
e Pro-Logic (PRO LOGIC) compatible mode: This is the conventional Dolby Surround Pro-Logic mode.
POWER
VCR POWER
TV POWER TV POWER CH TV/VCR SLEEP
+10 0
CALL
DISPLAY RETURN INPUT MODE SURROUND
MENU FUNCTION
1.3 1,3
ENTER
MODE
VOLUME
BAND
MUTE
CH SHIFT
NTSC/PAL STATUS
TU MEMO
SUB TITLE AUDIO ANGLE TOP MENU
PROG/DIRECT REPEAT A-B REPEAT RANDOM
CH.SELECT T.TONE SDB/TONE SURR.PARA
2
SETUP
CDR/MD/TAPE TUNER/TV/VCR DVD
REMOCON MODE
1
At the 2-channel setting (page
23), select PLII C, PLII M or
PRO LOGIC.
Remote control unit
2
Set the surround parameters
according to the selected mode.
• The parameters switch as
shown below each time the
button is pressed.
Remote control unit
PL II CINEMA PL II MUSIC PRO LOGIC
PANORAMA DEFAULT
DEFAULT
DIMENSION
CENTER WIDTH
DEFAULT
3
Set the various surround parameters.
• PANORAMA setting
, /
The selected setting ("ON" or "OFF") flashes.
24
and 2-channel sources (CDs, etc.) are decoded using Dolby
• DIMENSION setting
...
, /
• CENTER WIDTH setting
...
, /
• DEFAULT setting
SURR.PARA
, /
If "YES" is selected, the settings are reset to the
factory defaults.
Once the surround parameters have been set, stop
operating buttons. After several seconds the display
returns to normal and the settings are automatically
validated.
This completes the setting of the parameters
NOTES:
• The 2-channel mode setting is stored in the memory for
the individual functions.
• It is not possible to play DTS digital input sources in the
Dolby mode.
(2) Playing in the AUTO DECODE mode
• In the auto decode mode it is possible to play in the Dolby Digital or DTS Surround mode, depending on the format of the input
signal.
• It is also possible to play in the Auto Stereo, Dolby Pro-Logic II Cinema/Music or Dolby Pro-Logic mode, according to the 2-
channel mode setting.
[1] Dolby Digital and DTS surround playback (digital
inputs only)
• Applicable sources
• Digital inputs (TV/DBS and V.AUX functions, including DVD
playback discs)
Dolby Digital multi-channel sources
DTS sources
...
...
2
6
MODE
1
Select the digital input function. (DVD or TV/DBS or
V.AUX digital input)
FUNCTION
/ SELECT
Main unit
2
Set the input mode to
"AUTO".
DTS sources can also be
played in the input mode
"DTS".
3
Set the surround mode to "AUTO DECODE".
SURROUND
MODE
Main unit
1, 3
If the mode is set to anything other than AUTO
DECODE, the AUTO DECODE mode can be set
using the AUTO DECODE/2CH MODE button on
the main unit.
3 3
4
Play a program source containing the
CH
ON 1 2 3
POWER POWER VCR
CH
OFF 4 5 6 • The Dolby Digital indicator
VCR POWER VCR POWER
CH VOL
CLEAR 7 8 9 lights when playing a
TV
TV POWER TV POWER SLEEP
CH TV/VCR
Dolby Digital source.
CALL +10 0
DISPLAY RETURN INPUT MODE SURROUND
3
• The DTS indicator lights
MENU FUNCTION
1
when
source.
6
ENTER
The mode is selected automatically according to
the format of the source being played.
VOLUME
BAND
5
MUTE Display the surround parameters
CH SHIFT
NTSC/PAL STATUS
for the source.
TU MEMO
SUB TITLE AUDIO ANGLE TOP MENU
The surround parameters are
PROG/DIRECT REPEAT A-B REPEAT RANDOM
also displayed on the screen
CH.SELECT T.TONE SDB/TONE SURR.PARA
5 when the function is set to
SETUP CDR/MD/TAPE TUNER/TV/VCR DVD
DVD.
REMOCON MODE
6
Select the various surround
parameters and set them.
The display returns to
normal if no operation is
performed for 4 seconds
FUNCTION
while the parameters are
displayed.
• D.COMP. setting
Remote control unit
INPUT MODE
Remote control unit
This parameter is not displayed when playing DTS
source.
FUNCTION
SURROUND
/ SELECT
\
Main unit Remote control unit
or
mark.
DIGITAL Lit
DTS Lit
playing a DTS
SURR.PARA
Remote control unit
Remote control unit
, /