Denon DHT-1000DV Operating Instructions Manual page 18

ENGLISH
(3) Playback
IMPORTANT SETUP INFORMATION
This set has the following presettings: "DISC SETUP", "OSD SETUP", "VIDEO SETUP", "AUDIO SETUP", "RATINGS", and
"OTHER SETUP".
These presettings have been preset upon shipment from the factory. If you wish to change them to suit your specific purposes,
refer to pages 40 to 45.
Before operating the remote control unit!
• Be sure to set the DVD mode using the
remote control mode selector buttons.
(3)-3 (3)-5 (4)-1
(3)-1 (3)-2,(3)-4 (5)-1
1 Turn on the power.
• Press the power button, the power indicator lights
and the power turns on.
ON / STANDBY
Light
(green)
ON
POWER
Main unit Remote control unit
2 Press the OPEN/CLOSE button to open the disc tray.
OPEN / CLOSE
Main unit
3 Set the disc in the disc tray.
DVD DIG
AUTO
DIGITAL
18
DVD
CH
(3)-1
ON 1 2 3
POWER POWER CH VCR
OFF 4 5 6
VCR POWER VCR POWER
CH VOL
CLEAR 7 8 9
TV
TV POWER TV POWER
CH TV/VCR SLEEP
CALL +10 0
DISPLAY RETURN INPUT MODE SURROUND
MENU FUNCTION
(3)-6
(3)-6
ENTER
(3)-7
(3)-5
MODE
(4)-1 VOLUME
BAND
(5)-1
MUTE
CH SHIFT
NTSC/PAL STATUS
TU MEMO
4 Press the OPEN/CLOSE button.
OPEN / CLOSE
Main unit
5 Press the PLAY button.
• For many interactive DVDs and video CDs with
playback control, a menu screen appears. In this
case use the procedure in step 6 to select the
desired item.
Main unit Remote control unit
Interactive DVDs are DVDs including multiple angles,
stories, etc.
Example: For DVDs with Example: For video CDs with
menu screens
TOP MENU 1. Opening
2. 1st movement
Apple
Banana
3. 2nd movement
Orange Strawberry
4. 3rd movement
Peach Pineapple
5. Ending
6
Use the cursor buttons (
the desired item.
• For some discs there is a second menu screen. If so,
press the 9 button to display the next menu
screen. (See the disc's jacket.)
The cursor buttons (
work for video CDs. Use the number buttons to
select the desired item.
Remote control unit
• If appears on the TV screen while buttons are
being operated, that operation is not possible on the
ADV-1000 or with that disc.
• Set the disc in the disc guide.
(4) Stopping Playback
1 During playback, press the STOP button on the main
unit or the remote control unit, playback stops and wall
paper is displayed.
<Resume play memory function (DVD only)>
• With the ADV-1000, when the STOP button is
pressed, that position is stored in the memory. At
this time, " 1 " flashes on the display. When the
PLAY button is pressed after pressing the STOP
button, playback resumes from the position at which
it was stopped.The resume play memory function is
cancelled if the disc tray is opened or the STOP
button is pressed a second time.
playback control
(5) Playing Still Pictures (Pausing)
1 During playback, press the PAUSE button on the main
unit or the remote control unit.
• Press the PLAY button to resume normal playback.
7 Press the ENTER button.
, , and ) to select
• The desired item is selected and playback starts.
• You can return to the menu screen by pressing the
TOP MENU button while the DVD is playing, though
this depends on the disc.
• Press the RETURN button during playback of a video
CD to return to the menu screen.
, , and ) do not
Example: When "Apple" is
selected
TOP MENU
Apple
Banana
Strawberry
Orange
Pineapple
Peach
NOTES:
• Only set one disc in the tray.
• The disc keeps turning while the menu screen is displayed
on the TV screen.
BAND
Main unit
The resume play memory function only works for
discs for which the elapsed time is shown on the
display during playback.
Auto power off function.
• The ADV-1000 is equipped with a function that
automatically switches the power to standby if no
operation is performed for 30 minutes while in the
stop mode with the function set to DVD.
• This function is set to off upon shipment from the
factory. If you wish to turn it on, set the "DVD auto
power off setting" to "YES" as described on page
17.
Main unit
ENTER
Remote control unit
Apple
Remote control unit
Remote control unit