Table of Contents
Advertisement
6. Close the right and align the screw holes on the right hinge with the screw holes on the system board.
7. Replace the two (M2.5x5) screws to secure it to the palm-rest.
Next steps
1. Install the
display
assembly.
2. Install the
heat
sink.
3. Install the fan.
4. Install the
wireless
card.
5. Install the SSD.
6. Install the
memory
modules.
7. Install the battery.
8. Install the
base
cover.
9. Install the
SD
card.
10. Follow the procedure in
Palm-rest and keyboard assembly
Removing the palmrest and keyboard assembly
Prerequisites
1. Follow the procedure in
2. Remove the
SD
card.
3. Remove the
base
cover.
4. Remove the
battery
.
5. Remove the
memory
modules.
6. Remove the SSD.
7. Remove the
wireless
card.
8. Remove the fan.
9. Remove the
heat
sink.
10. Remove the
I/O board
11. Remove the
I/O
board.
12. Remove the speakers.
13. Remove the touchpad.
14. Remove the
display
assembly.
15. Remove the
power-adapter
16. Remove the
power
button.
17. Remove the
system
board.
NOTE:
The system board can be removed along with the heat sink.
About this task
The following image indicates the location of the palm-rest and keyboard assembly and provides a visual representation of the
removal procedure.
84
Removing and installing components
After working inside your
Before working inside your
FFC.
port.
computer.
computer.
Advertisement
Table of Contents
