Table of Contents
Advertisement
3. Remove the
base
cover.
4. Remove the
memory
modules.
5. Remove the SSD.
6. Remove the
wireless
card.
7. Remove the
display
assembly.
8. Remove the
hinge
caps.
9. Remove the
display
bezel.
10. Remove the hinges.
11. Remove the
display
panel.
About this task
The following image indicates the location of the eDP cable (in a system shipped with an aluminum chassis) and provides a visual
representation of the removal procedure.
Steps
1. Disconnect the eDP cable from the camera.
2. Peel and remove the eDP cable from the display cover.
Installing the eDP cable (Aluminum)
About this task
The following image indicates the location of the eDP cable (in a system shipped with an aluminum chassis) and provides a visual
representation of the installation procedure.
68
Removing and installing components
Advertisement
Table of Contents
