Steps
1. Place the I/O daughter board FFC on the palm-rest and keyboard assembly.
2. Connect the I/O daughter board FFC the connector on the I/O board.
3. Connect the I/O daughter board FFC the connector on the system board.
Next steps
1. Install the fan.
2. Install the
base
cover.
3. Install the
SD
card.
4. Follow the procedure in
I/O board
Removing the Input/Output board
Prerequisites
1. Follow the procedure in
2. Remove the
SD
card.
3. Remove the
base
cover.
4. Remove the fan.
5. Remove the SSD.
About this task
The following images indicate the location of the Input/Output board and provide a visual representation of the removal
procedure.
38
Removing and installing components
After working inside your
Before working inside your
computer.
computer.