Table of Contents
Advertisement
Steps
1. Using the alignment post, place the power-adapter port into its slot on the palm-rest and keyboard assembly.
2. Connect the power-adapter port cable to the connector on the system board.
3. Fold the right hinge down and install the two (M2.5x5) screws to secure it to the palm-rest and keyboard assembly.
Next steps
1. Install the
wireless
card.
2. Install the SSD.
3. Install the
base
cover.
4. Install the
SD
card.
5. Follow the procedure in
System board
Removing the system board
Prerequisites
1. Follow the procedure in
2. Remove the
SD
card.
3. Remove the
base
cover.
4. Remove the
battery
.
5. Remove the
memory
modules.
6. Remove the SSD.
7. Remove the
wireless
card.
8. Remove the fan.
9. Remove the
heat
sink.
NOTE:
The system board can be removed along with the heat sink.
10. Remove the
display
assembly.
After working inside your
Before working inside your
computer.
computer.
Removing and installing components
79
Advertisement
Table of Contents
