4. Pry open the display bezel from the inner edge at the bottom side of the display assembly.
5. Lift and remove the display bezel from the display assembly.
Installing the display bezel
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
NOTE:
This procedure is applicable for systems with plastic chassis.
About this task
The following image indicates the location of the display bezel and provides a visual representation of the installation procedure.
Steps
Align the display bezel with the display back-cover and antenna assembly, and then gently snap the display bezel into place.
Next steps
1. Install the
hinge
caps.
2. Install the
display
assembly.
3. Install the
wireless
card.
4. Install the SSD.
5. Install the
memory
modules.
58
Removing and installing components