Steps
1. Using the alignment posts, place the speakers on the palm-rest and keyboard assembly.
NOTE:
Ensure that the alignment posts are threaded through the rubber grommets on the speaker.
2. Route the speaker cable through the routing guides on the palm-rest and keyboard assembly.
3. Connect the speaker cable to the system board.
4. Adhere the adhesive tape to secure the speaker cable.
Next steps
1. Install the battery.
2. Install the
base
cover.
3. Install the
SD
card.
4. Follow the procedure in
Power-button board
Removing the power button with optional fingerprint reader
Prerequisites
1. Follow the procedure in
2. Remove the
SD
card.
3. Remove the
base
cover.
4. Remove the SSD.
5. Remove the
wireless
card.
6. Remove the
I/O
board.
About this task
The following images indicate the location of the power button with optional fingerprint reader and provides a visual
representation of the removal procedure.
42
Removing and installing components
After working inside your
Before working inside your
computer.
computer.