Table of Contents
Advertisement
Steps
After performing the pre-requisites, you are left with the palm-rest and keyboard assembly.
Installing the palmrest and keyboard assembly
Prerequisites
If you are replacing a component, remove the existing component before performing the installation process.
Steps
NOTE:
For systems with a plastic chassis, both the left and right RF metal brackets MUST be transferred to the
replacement palm-rest assembly.
Place the palm-rest and keyboard assembly on a flat and clean surface and perform the post-requisites to install the palm-rest
and keyboard assembly.
Next steps
1. Install the
system
board.
2. Install the
power
button.
3. Install the
power-adapter
4. Install the
display
assembly.
5. Install the touchpad.
6. Install the speakers.
7. Install the
I/O
board.
8. Install the
I/O board
FFC.
9. Install the
heat
sink.
10. Install the fan.
11. Install the
wireless
card.
12. Install the SSD.
13. Install the
memory
modules.
14. Install the battery.
port.
Removing and installing components
85
Advertisement
Table of Contents
