Siemens SIMATIC NET RUGGEDCOM MX5000RE Installation Manual page 21

Installing the Device
2.3 Installing the Power Supply Patch Cables
3.
4.
12
Remove the three terminal lug screws from the terminal block.
DANGER
Electrocution hazard – risk of death, serious personal injury and/or damage
to the device
Make sure the supplied cover is always installed over high voltage screw-type
terminal blocks.
NOTICE
Electrical hazard – risk of damage to equipment
Do not connect AC power cables to a DC power supply terminal block. Damage
to the power supply may occur.
Connect the live (+/L) lug from the PS1 cable assembly to the live terminal on
the PS1 terminal block.
Live Terminal
1
Ground Terminal
2
Neutral Terminal
3
Figure 2.2 AC Terminal Block Wiring
Live Terminal
1
Ground Terminal
2
Neutral Terminal
3
Figure 2.3 DC Terminal Block Wiring
1
2
3
1
2
3
Installation Manual, 01/2021, C79000-G8976-1060-13
RUGGEDCOM MX5000RE