MSI MS-6377 Manual page 80

To clear a set password, just press <Enter> when you are prompted to enter the
password. A message will show up confirming the password will be disabled.
Once the password is disabled, the system will boot and you can enter Setup
without entering any password.
When a password has been set, you will be prompted to enter it every time you
try to enter Setup. This prevents an unauthorized person from changing any
part of your system configuration.
About Supervisor Password & User Password:
Supervisor password : Can enter and change the settings of
User password:
Clear User Password
Select the function and a message as below will appear on the screen:
Select OK to clear the user password or select Cancel to keep the user password.
Boot Sector Virus Protection
The item is to set the Virus Warning feature for IDE Hard Disk boot sector
protection. When Enabled, BIOS will issue a virus warning message and
beep if a write to the boot sector or the partition table of the HDD is
attempted. Setting options are Disabled and Enabled.
Note: This feature only protects the boot sector, not the whole hard disk.
the setup menu.
Can only enter but do not have the right
to change the settings of the setup menu.
Clear User Password?
[OK] [Cancel]
3-35
®
AMI BIOS Setup