Table of Contents
Advertisement
Chapter 3
Suspend
Sleep Button Enable
This feature sets the function of the sleep button (power saving switch).
Settings are:
Disabled
Suspend
Power LED mode
This item sets how the system uses Power LED on the case to indicate the
suspend/sleep state. Settings are:
Blinking
Single
Dual
The power LED will function differently in various operating systems as
described below:
-- In Windows 98, Windows ME & Windows 2000
Power LED
Green LED
Therefore, when you use the SINGLE color LED, you can select Single or
Blinking for the Power LED mode. When you use the DUAL color LED,
you can only select Dual.
After perssing the button, the non-ACPI system will
require four seconds before it shuts down.
When you press the power button, the computer
enters the suspend/sleep mode, but if the button is
pressed for more than four seconds, the computer is
turned off.
The sleep button does not function.
When you press the sleep button, the computer enters
the suspend/sleep mode. To wake up the system, hit
any key on the keyboard.
The Power LED blinks to indicate the suspend/sleep
state.
The Power LED remains the same color.
The Power LED changes its color to indicate the
suspend/sleep state.
Single
S0
S0
S1
ON
ON
ON
OFF
OFF
ON
Blinking
S1
S0
Blinking
Color1 Color2
ON
3-30
Dual
S1
Advertisement
Table of Contents
