Table of Contents
Advertisement
Hardware Setup
Fan Power Connectors: CPUFAN1/CPUFAN2/SFAN1
The CPUFAN1/CPUFAN2 (processor fans) and SFAN1 (system fan)
support system cooling fan with +12V. It supports three-pin head
connector. When connecting the wire to the connectors, always take note
that the red wire is the positive and should be connected to the +12V, the
black wire is Ground and should be connected to GND. If the mainboard has
a System Hardware Monitor chipset on-board, you must use a specially
designed fan with speed sensor to take advantage of the CPU fan control.
GND
+12V
SENSOR
GND
+12V
CPUFAN2
SENSOR
SFAN1
+12V
GND
SENSOR
CPUFAN1
Note:
1. Always consult the vendor for proper CPU cooling fan.
2. CPU Fan supports the fan control. You can install the PC Alert utility
that will automatically control the CPU Fan speed according to the
actual CPU temeperature.
2-19
Advertisement
Table of Contents
