Case Connector: Jfp1 - MSI MS-6377 Manual

Case Connector: JFP1

The case connector block JFP1 allows you to connect to the Power
Switch, Reset Swtich, Speaker, Power LED, and HDD LED on the case.
Power Switch
Connect to a 2-pin push button switch.
Reset Switch
Reset switch is used to reboot the system rather than turning the power ON/
OFF. Avoid rebooting while the HDD is working. You can connect the
Reset switch from the system case to this pin.
Power LED
The Power LED is lit while the system power is on. There are three types of
LEDs you can connect from the system case to the pin:
2-pin single color power LED: Connected to pin 3 & 4. When the
system enters the suspend/sleep mode, the 2-pin power LED blinks.
2-pin dual color power LED: Connected to pin 3 & 4. The 2-pin
HDD LED
Power
LED
Power
Switch
2-15
Hardware Setup
JFP1
Buzzer
(short pin)
13
Speaker
14
Reset
Switch
J3