Table of Contents
Advertisement
Chapter 3
Parallel Port IRQ
The item specifies the IRQ for the onboard parallel port. Settings are 7 and
5.
Parallel Port Mode
This item selects the operation mode for the onboard parallel port: Normal,
Bi-Directional, EPP (Enhanced Parallel Port), or ECP (Extended Capability
Port).
ECP Mode DMA Channel
This feature appears only when Parallel Port Mode is set to the ECP mode.
The item is used to determine the DMA channel for the parallel port. Set-
tings are from 0 to 3.
Note:
Parallel Port I/O port address "3BC" does not support EPP mode.
Therefore, when you select 3BC, EPP is not available in the Parallel
Port Mode. When you set the parallel port to EPP mode, 3BC will not be
available.
3-10
Advertisement
Table of Contents
