MSI MS-6377 Manual page 62

®
AMI BIOS Setup
Setting to On will turn on the Num Lock key when the system is powered on.
Setting to Off will allow end users to use the arrow keys on the numeric
keypad. Setting options are On and Off.
BootUp CPU Speed
This item specifies the CPU speed during bootup. Selecting High will have
the CPU run at the default speed; selecing Low will reduce the CPU speed.
Some peripherals or old software may require a slow CPU speed.
Typematic Rate
This item allows you to set the rate at which the keys are accelerated.
Settings are Fast and Slow.
System Keyboard
This determines whether the system will check the presence of the keyboard
at boot. Select Absent when the system is not attached with a keyboard and
you don't want the system to show the keyboard error message. Settings
are Present and Absent.
Primary Display
The item sets the type of video adapter used for the primary monitor of the
system . Available settings are VGA/EGA, Color 40x25, Color 80x25 and
Monochrome.
Parity Check
Parity checking is an error detection technique. You can enable the PC to
perform a parity check to test the memory each time when the system is
powered on. Settings are Enabled and Disabled.
Boot To OS/2
®
This allows you to run the OS/2 operating system with more than 64MB
®
DRAM. When you choose No, you cannot run the OS/2 operating system
with more than 64MB DRAM. But it is possible if you choose Yes.
Wait For 'F1' If Error
When the boot sequence encounters an error it asks you to press F1. Only
at 'non-fatal' errors. If disabled, the system prints a warning and continues
3-17