Table of Contents
Advertisement
SuperIO Configuration
The sub-menu is used to configure serial and parallel ports.
Main
Advanced
Configure Nat317 Serial Port(s) and Parallel Port
Serial Port1 Address
Serial Port1 Irq
Serial Port2 Address
Serial Port2 Irq
Serial Port2 Mode
Parallel Port Address
Parallel Port IRQ
Parallel Port Mode
ECP Mode DMA Channel
v02.03 (C)Copyright 1985-2000, American Megatrends Inc.
Serial Port1 Address/Irq, Serial Port2 Address/Irq
These items specify the base I/O port addresses and IRQs of the onboard
Serial Port 1 (COM 1)/Serial Port 2 (COM 2). Available settings for I/O port
address are Disabled, 3F8, 2F8, 3E8 and 2E8, and those for IRQ are
Disabled, 4 and 3.
Serial Port2 Mode
This item sets the operation mode for Serial Port 2 (COM 2). Settings are
Normal, Sharp-IR, SIR and Consumer.
Parallel Port Address
This item specifies the base I/O port address of the onboard parallel port.
Settings are 378, 278, 3BC and Disabled.
BIOS SETUP UTILITY
Chipset
PCIPnP
[3F8]
[4]
[2F8]
[3]
[Normal]
[378]
[7]
[ECP]
[3]
3-9
AMI
Power
Boot
Security
↔
Select Screen
↑ ↓
Select Item
+ −
Change Option
F 1
General Help
F 1 0
Save and Exit
E S C
Exit
®
BIOS Setup
Exit
Advertisement
Table of Contents
