Table of Contents
Advertisement
Chapter 3
The Boot Menu
The Boot menu is used to set the boot sequence of boot devices. To go to
each item's sub-menu screen, highlight the item and press <Enter>.
Main
Advanced
8
Boot Device Priority
8
Hard Disk Drives
8
Removable Devices
8
ATAPI CDROM Drives
v02.03 (C)Copyright 1985-2000, American Megatrends Inc.
Boot Device Priority
The sub-menu assigns the boot priority of boot devices by TYPE. There are
three settings available for each item on the screen: Removable Device,
Hard Drive and ATAPI CDROM. Removable Device refers to REMOVABLE
tape devices such as floppy drives and ZIP drives etc. Hard Dirve refers to
any hard disk drive. ATAPI CDROM represents ATAPI CD-ROM drives.
Hard Disk Drive
The sub-menu assigns the boot priority of all hard disk drives installed in
the system. If more than one hard disk drive are installed in the system, you
will see more than one item appear on the screen, such as 2nd Hard Drive,
3rd Hard Drive etc. Then you can arrange the boot sequence of these hard
disk drives.
BIOS SETUP UTILITY
Chipset
PCIPnP
3-32
Power
Boot
Security
↔
Select Screen
↑↓
Select Item
Enter Go to Sub Screen
F 1
General Help
F 1 0
Save and Exit
E S C
Exit
Exit
Advertisement
Table of Contents
