No.
Parts
14
Compressor
* Removal of belt
heater included
Samsung Electronics
Procedure
1) Remove a hex nut from the end of
Cover and separate it
(Use Hexagon Wrench, Monkey
Spanner, Hexagon Socket)
2) Separate the Felt Compressor.
3) Detach the spring of belt heater to
remove from compressor
(Belt heater connecter is already
removed from the Control part in the
procedure 1 of No. 11.)
4) Remove the 3 hex nuts from the
bottom of Compressor like the
picture on the right side.
(Use Hexagon Wrench, Monkey
Spanner, Hexagon Socket)
Disassembly and Reassembly
Remark
3-129