Table of Contents
Advertisement
9410 series
Specifications overview
Mechanical characteristics
9410DC panel mount meter
Mounting position
IP degree of protection
Display type
Display backlight
Viewable area
Keypad
Maximum number of option modules
9410TC DIN meter
Mounting position
IP degree of protection
Maximum number of option modules
Mechanical compliance
Vibration
Shock
Electrical characteristics
194
This section provides additional specifications for your meter and accessories.
The information contained in this section is subject to change without notice. You can
download updated documentation from www.usa.siemens.com/pds or contact your
local Siemens Industry Industry representative for the latest updates.
See your device's installation sheet for specifications related to installation, such as
measured current and voltage ranges, inputs/outputs and control power information.
Vertical
Display: IP54
Meter body: IP30 (except connectors)
1/4 VGA color graphic TFT LCD, 320 x 240 resolution
White LED
70.6 x 52.9 mm (2.78 x 2.08 in)
5 button
4 (based on mechanical stress and required IP rating)
Horizontal TS35 DIN rail
Meter body: IP30 (except connectors)
4 (based on mechanical stress and required IP rating)
IEC 60068-2-6
IEC 60068-2-27
True RMS 4–quadrant metering up to the 63rd harmonic on three-phase systems, 256
samples per cycle.
NOTE: Reactive energy and demand values are based on the fundamental, and
do not include higher harmonics. Other energy and demand values are measured
using the entire signal including harmonics. Contact Technical Support for more
information.
NOTE: Table below assumes default configuration. Some values can be changed
through framework and/or custom configuration.
Specifications overview
7EN05-0336-03
Advertisement
Table of Contents
Troubleshooting
