Intel® Server System M50FCP1UR System Integration and Service Guide
2.4
Memory Module Installation
Required Tools and Supplies
Anti-static wrist strap and conductive workbench pad (recommended)
•
The Intel® Server System M50FCP1UR supports DDR5 standard RDIMMs 3DS-RDIMMs, and 9x4 RDIMMs. In
addition, the server board supports Intel® Optane™ persistent memory 300 series modules (also known as,
Intel® Optane™ PMem).
DDR5 DIMM and Intel® Optane® PMem devices are commonly referred to as "memory module" in the
following procedure.
Notes:
DIMM blanks should only be removed when installing a memory module in its place.
•
See
Appendix C
•
1. Remove the DIMM blank from the desired memory slot:
Open the ejection tabs at both ends of the selected memory slot to lift the DIMM blank from the
•
slot (see Letter A).
Carefully remove the DIMM Blank from the system (see Letter B).
•
for memory population rules.
Figure 21. DIMM Blank Removal
Figure 22. Memory Module Installation
29