Get Started
Crossfill
FEATURE REQUIREMENTS
•
Dual GTN configuration
Enable the crossfilling of information between two GTN units.
Crossfill Features
•
Enabling this function on one GTN automatically enables it on the other.
•
Some types of data crossfill regardless of the current setting
WAYPOINT IDENTIFIERS
When crossfilled from GTN to GNS, duplicate waypoint names, or names exceeding
six characters in length, are shortened. A "+" sign replaces certain characters while
leaving significant characters to aid in identification (e.g., USR003 becomes US+003).
GTN to GTN Data
Alerts:
•
Traffic pop-up acknowledgment
•
Missed approach waypoint popup acknowledgment
•
Altitude leg pop-up acknowledgment
External Sensors:
•
Synchro heading
•
Transponder status and commands
Flight Plan Catalog
System Setup:
•
User-defined NAV frequencies
•
Date/Time convention
•
Nearest airport criteria
•
Units (Nav angle, Fuel, and Temperature)
•
User-defined COM frequencies
•
CDI Scale setting
•
ILS CDI Capture setting
User waypoints
Includes active flight plan navigation data if you turn on the crossfill function.
2-80
Pilot's Guide
190-02327-03 Rev. C