Remote Radio Control
FEATURE REQUIREMENTS
•
Second GTN Xi series navigator: GTN 635Xi, GTN 650Xi, or GTN 750Xi
FEATURE LIMITATIONS
•
Dual GTN Xi installations only
•
NAV radio options available only on GTN 650Xi/750Xi
Some dual GTN Xi installations allow you to tune radio frequencies on both units
from a single navigator. Control options allow you to switch between local control
(local navigator only) and remote control (local and remote navigators).
Radio ID Label
Standby
Frequency
190-02327-03 Rev. C
An inverted radio label differentiates
COM/NAV 2 from COM/NAV 1.
This label always appears for
COM/NAV 2 regardless of whether
it is the remote or local radio.
Tapping STBY opens the control
panel for the indicated radio.
From here you may tune the
indicated radio or access controls
for all radios by tapping the
Radios key.
Pilot's Guide
Get Started
2-35