Garmin GTN 650Xi Series Pilot's Manual page 380

Hazard Awareness
Traffic Status & Active Applications
•
Status indications:
•
On means the AIRB and ATAS traffic applications are active
•
Off means that air and ground applications are inactive
•
3
Test means the traffic test function is active
•
Fail means that ADS-B reports a failure
•
+SURF means that ground targets displays in addition to
airborne targets
•
Altitude filter setting (NORM, ABV, BLW, UNR)
Range Ring
•
Outer ring represents selected range
4
•
Range options vary according to traffic application
Selected Vector Type and Duration
Types: Absolute and Relative
5
Refer to Motion Vectors for more information.
Intruding Aircraft Symbol
Actual intruder location varies according to symbol type.
6
•
Tip of directional symbols
•
Center of non-directional symbols
Altitude Separation Value
Indicates when an intruder is above or below the ownship.
•
Value appears above or below the traffic symbol, depending on
7
relative altitude
•
Plus or minus sign denotes higher or lower altitude in hundreds
of feet
Vertical Trend Arrow
8
Active when an intruder is climbing or descending at a vertical speed
greater than 500 fpm.
Next Key
9
Available when multiple targets are spaced closely together.
Selected Traffic Information Window
10
Select and view aircraft information for multiple traffic symbols.
Refer to Traffic Interactions for more information.
Page Orientation Label
•
Track Up orients page to current aircraft GPS track
11
•
Heading Up orients page to current aircraft heading
(requires heading data source interface)
5-72 Pilot's Guide 190-02327-03 Rev. C