Table of Contents
Advertisement
Maintenance
5
Chapter 9 / 16
Dust
Fine sharp lines in slow scan
direction on the flat field (see
beside).
· Check if scanner is dusty. In case
of, use the scan-brush to remove
it. Expose another flat field and
compare it again with the sample.
If there are still
unacceptable effects please contact
the Support Center.
Completion of Maintenance
(1) Confirm the maintenance by signing the checklist
(2) Make a backup of the system on floppy
(3) Inform the customer about what was done during the maintenance and
which repairs need to be done in next future.
ADC Compact Plus
(Type 5146 / 100/200)
DD+DIS015.02E
Figure 15
Edition 1, Revision 1
Advertisement
Table of Contents
