Table of Contents
Advertisement
Maintenance
2
2.1
Chapter 9 / 2
·
You can hurt your fingers if they are caught between the ADC Cassette
and the edge of the input slot. Insert the cassette in the input buffer as
described in the User Manual. At all times, keep your fingers clear of the
input slot. As soon as the ADC Compact Plus takes in the cassette,
release it.
General Information
These maintenance instructions must be considered confidential.
To ensure quality and functional reliability of the system all the points listed
below (minimum maintenance points) must be carried out.
·
The maintenance points have been arranged in a chronologically
suitable order to make the work routines as efficient as possible.
The sequence of the maintenance points in the checklist (see
appendix) is identical with these maintenance instructions.
·
If there is a detailed description for a certain maintenance point in
the service documentation, this will be noted in the column "details".
·
During the maintenance procedure always consider the safety
instructions, see TECHNICAL DOCUMENTATION chapter 1 / 1.
·
Please check if it is necessary to include country specific regulations
as additional maintenance points!
Only for Systems with DRA Contract:
In systems with DRA Contract the infocounters are checked and evaluated in
regular intervals by the GSC. If there is an indication of an upcoming defect,
this is noted in the DRA Report and sent to the respective NSO with
instructions for measures possibly required on the machine.
Therefore we recommend to contact your NSO about this subject before
maintenance, in order to perform these recommended measures in addition
to the "must" maintenance points.
Maintenance Frequency
The maintenance has to be carried out:
·
every 25.000 cycles or
·
once a year
ADC Compact Plus
(Type 5146 / 100/200)
Warning Label at the Input buffer of the
ADC Compact Plus.
DD+DIS015.02E
Edition 1, Revision 1
Advertisement
Table of Contents
