Table of Contents
Advertisement
Appendix
A.10 Transparency software
A.10
Transparency software
A.10.1
Retrieving measured values
This procedure does not apply to Giro-e. The procedure is described in the section Debit card
(Page 128).
Retrieving the signed readings
In order to obtain energy for the electric vehicle, you must be registered with an operator.
With these login details, you can register with the operator of the charging station. After
logging in with the operator, you can download the signed measurement data. You can use
the Transparency software to open the downloaded file.
Note
Sequence of measured value retrieval
This section describes how to store the signed measured values locally using the backend
operator Has.To.Be as an example.
132
SICHARGE Operating instructions, ERK
Operating Instructions, 06/2021, A5E48571690-AC
Advertisement
Table of Contents
