Faqs - Siemens Sicharge CC AC22-ERK Operating Instructions Manual

Malfunctions

7.3 FAQs

SD card fault
Message frame text Charging station ⇒ Backend: OtherError
(RegulatoryComplianceFailure)
Message frame text Backend ⇒ Charging station: Faulted
Component: Charge point 1 or 2
Status LED: Flashes red 10×
Description
SD card faulty
GSWML (DE) compatibility
7.3 FAQs
Frequently Asked Questions (FAQ)
The following table shows an excerpt of possible messages.
The symbols, their meanings and solutions are described in the three columns.
Symbol
88
Cause
SD card defective
Meaning
Vehicle not connected
Vehicle connected
Vehicle is being analyzed
Vehicle accepted
(≤ 32 A @ 3 Ph/22 kW)
Vehicle accepted (i-MiEV Legacy
Mode, ≤ 16 A @ 1/3.7 kW)
Vehicle accepted (Mode 3 Simpli-
fied, ≤ 16 A @ 1 Ph/3.7 kW)
Solution
Replace SD card
Note:
Observe the statutory and weights and
measures regulations.
Solution
Connect the charging cable to the vehicle.
Check the charging cable.
-
Wait a moment.
-
-
-
SICHARGE Operating instructions, ERK
Operating Instructions, 06/2021, A5E48571690-AC