Commissioning Instructions For The Lmv5; Basic Configuration - Siemens LMV50 Series Manual

1. Parameterizing the
burner identification
(burner ID)
Menu level 1 Menu level 2
Updating
BurnerID
2. Selecting the fuel
trains
Menu level 1 Menu level 2
Params & Display
BurnerControl
3. Checking the inputs / outputs while taking into account the burner and plant conditions. For details, refer
to chapter Digital inputs.
Menu level 1 Menu level 2
Parameter & Display
BurnerControl
166/327
Building Technologies
9 Commissioning instructions for the
LMV5
Practice-oriented setting instructions for the system configuration, the burner
control, and the electronic fuel-air ratio control system
These setting instructions serve for commissioning the LMV5.
To access the parameter setting levels, a password must be entered.
After having entered the correct password, the data appear on the AZL5 (backup for
emergencies). Then, the unit can be parameterized.
After leaving the parameter setting level, we recommend to make a backup.

9.1 Basic configuration

Menu level 3
Burner identification: E.g. OEM13-10-02-003 (name of OEM = burner manufacturer;
date 13-10-2002, production number 003); minimum 4
characters
Menu level 3
Configuration
FuelTrainGas from DirectIgniG to Pilot Gp2
FuelTrainOil from LightOilLO to HO w Gasp
Menu level 3
Configuration
Basic Documentation LMV5...

9 Commissioning instructions for the LMV5

Menu level 4 Menu level 5
Menu level 4 Menu level 5
ConfigGeneral
FuelTrainGas
FuelTrainOil
Menu level 4 Menu level 5
ConfigIn/Output
Menu level 6
Menu level 6
Menu level 6
CC1P7550en
22.05.2018