Interconnection With B9512G Or B8512G Panel - Bosch PRAESENSA Manual

PRAESENSA
9.4

Interconnection with B9512G or B8512G panel

Scenario: B9512G or B8512G + PRA + 1 Strobe
1
NAC
2
A
1 Clear strobe
2 NAC rack for strobes (R1002ULADA)
3 Notification appliance module (D192G)
4 8‑input Expansion Module (B208)
5 Control panel (B9512G or B8512G)
6 8‑input Expansion Module (B208)
7 Octo‑output module (B308)
8 PRAESENSA system
See i.e. PRAESENSA product overview, page 14
Bosch Security Systems B.V.
B D
B8512G
D192G
or
3
B9512G
C E
D192G
3
B208
4
PRA-FRP3-US
B926M
(LOC/ACU)
10 11
Underwriters Laboratories Listing Document (ULLD)
B208
F
6
5
B308
7
B308
7
A Output signals from NAC (AC local, battery and
trouble)
B Notification output signal wiring for clear strobe
C Also for clear strobe, but can be used for second
strobe zone.
D Notification input- and output‑signal wiring for clear
strobe
E Also for clear strobe, but can be used for second
strobe zone.
F SDI2 class b wiring
G Connect the following output contact triggers from
the PRAESENSA output contacts to the B208 panel:
– Alarm Triggers and Trouble Signals from
PRAESENSA to B9512G or B8512G panel.
– Transfer of Control Signals
See Control outputs, page 79 .
H Connect the following output contact triggers from
the B308 panel to the PRAESENSA input contacts:
– Alarm Triggers to start the MNS and Fire audio
messages in PRAESENSA.
System Configuration | en 153
G
PRAESENSA
8
H
I
2021.12.21 | V0.15b | F.01U.402.882
9