Led Description - Front Panel - Bosch DIVAR IP 3000 Installation Manual

DIVAR IP 3000
Rear view:
1
2
3
4
2.3.1

LED description - front panel

This chapter describes the LED displays on the front of the chassis.
LED indicator
Power LED
Bosch Sicherheitssysteme GmbH
1 2
1x VGA (monitor)
1x Ethernet (RJ45)
4x USB 2.0
Note: Use these ports for keyboard
and mouse connection.
1x eSATA for data export
Note: Do not connect hard disk drives
for recording.
LED color
N/A Off
Blue On (default)
Installation Manual
Available from A1 Security Cameras
www.a1securitycameras.com email: sales@a1securitycameras.com
3 4 5 6 7
5 Mains connection 100 - 240 VAC
6 1x USB 3.0
Note: Do not use this port for
keyboard and mouse.
7 1x DVI (monitor), for local viewing
Note:
If the system is only connected to the
DVI port, no video signal is displayed
until the system has started
completely. This can take 1 – 2
minutes. A video signal is always
displayed when the monitor is
connected to the VGA port.
LED state
Power off
Working (S0 state)
System overview | en
Description
2013.09 | V2 | DOC
9