Functional Diagram; Parts Included; Transceiver; Fiber Cable - Bosch PRAESENSA Manual

PRAESENSA
3.11.2

Functional diagram

Functional and connection diagram
LC
3.11.3

Parts included

The box contains the following parts:
Quantity
1
No tools or Ethernet cables are provided with the device.
3.11.4

Transceiver

To install an SFP transceiver, follow the procedure below:
1.
2.
3.
4.
5.
3.11.5

Fiber cable

To insert a fiber cable with LC connector, follow the procedure below:
1.
2.
3.
4.
Bosch Security Systems B.V.
T
R
Component
SFP fiber transceiver
An SFP transceiver can be damaged by static electricity. Be sure to observe all standard
electrostatic discharge (ESD) precautions, such as wearing an antistatic wrist strap, to
avoid damaging the transceiver.
Remove the transceiver from its packaging.
Position the SFP transceiver with the label facing up. The transceiver can be
hot‑swapped; there is no need to power‑off the host device to install a transceiver.
With the handle on the transceiver oriented towards the host device, slide the transceiver
into the SFP socket and push until it clicks into place.
Verify that the handle on the transceiver is in the position that secures the transceiver
and prevents it from being dislodged from the socket.
Verify that the type of cable is appropriate for the SFP transceiver that is installed.
The SFP transceiver has two connectors. Each connector connects to a separate fiber
strand. One is for receiving data and the other is for transmitting data. When connecting a
fiber optic cable to the SFP module, be sure that the receive fiber connector is connected
to the transmitter connector on the remote end‑node device, and the transmit fiber
connector is connected to the receiver connector on the remote node.
Remove the dust plugs from the LC fiber cable and save the dust plugs for future use.
Then inspect and clean the cable end‑face.
Remove the dust plugs from the SFP transceiver optical bores. Immediately attach the LC
fiber cable to the SFP transceiver.
Underwriters Laboratories Listing Document (ULLD)
Installation wiring | en 105
Internal device functions
LC Dual lockable transmitter and
receiver connector
T Transmitter
R Receiver
Controller
2021.12.21 | V0.15b | F.01U.402.882