Checklist A Procedures; Perform 50 Hour Service; Grease The Steer Yokes - Terex Genie GRC-12 Service Manual

Service Manual

Checklist A Procedures

A-1

Perform 50 Hour Service

The 50 hour maintenance procedure is a one time
sequence of procedures to be performed after the
first 50 hours of usage. After this interval, refer to
the maintenance tables for continued scheduled
maintenance.
1 Perform the following maintenance
procedures:
• B-3 Inspect the Tires, Wheels and
Castle Nut Torque
• D-1 Replace the Hydraulic Return
Filter
14
A-2

Grease the Steer Yokes

Genie specifications require that this procedure be
performed every 100 hours of operation.
Regular application of lubrication to the steer
yokes is essential to good machine performance
and service life. Continued use of an insufficiently
greased steer yoke will result in component
damage.
1 Locate the grease fitting on the top of the
steer yoke.
2 Pump multipurpose grease into the steer yoke
until the steer yoke is full and grease is being
forced past the bearings. Repeat this step for
the other steer yoke.
Grease Specification
Chevron Ultra-duty grease, EP NLGI 1 (lithium based)
or equivalent
GRC ™
February 2022
Part No. 1314708GT