Mounting Rail Installation - Viessmann VITOSOL 300-T Installation Instructions Manual

Vertical rooftop installation
Fitting roof hooks for plain tile cover

Mounting rail installation

Turn tee bolts 90° for all installation steps.
(cont.)
1. Mark the position of the roof hooks
in accordance with the dimensions
shown in the diagram on page 7
and 10.
2. Remove tiles from the roof at the
hook contact points.
3. Hook the roof hooks onto the bat-
tens and position and align on top
of the tile below.
4. Secure the roof hooks to the bat-
tens.
5. Cover the roof; trim tiles to suit with
an angle grinder; trim approx.
30 mm off the tiles.
13