Samson TROVIS 5724-3 Mounting And Operating Instructions page 7

Responsibilities of operating personnel
Operating personnel must read and understand these mounting and operating instructions as
well as the referenced documents and observe the specified hazard statements, warnings
and caution notes. Furthermore, operating personnel must be familiar with the applicable
health, safety and accident prevention regulations and comply with them.
Referenced standards, directives and regulations
The TROVIS 5724-3 and TROVIS 5725-3 Electric Actuators with a CE marking comply with
the requirements of the Directives 2014/30/EU and 2014/35/EU.
The TROVIS 5724-3 and TROVIS 5725-3 Electric Actuators with an EAC marking comply
with the requirements of the Regulations TR CU 004/2011 and TR CU 020/2011.
The electric actuators are designed for use in low-voltage installations.
Î For wiring, maintenance and repair, observe the relevant safety regulations.
Referenced documentation
The following documents apply in addition to these mounting and operating instructions:
− Configuration Manual for TROVIS 5724-3 and TROVIS 5725-3 Electric Actuators with
Process Controller u KH 5724
− Mounting and operating instructions of the valve on which the electric actuator is
mounted, e.g. for SAMSON valves:
u EB 5861 for Type 3260 Three-way Valve
u EB 5863 for Type 3226 Three-way Valve
u EB 5866 for Type 3222 Globe Valve
u EB 5867 for Type 3222 N Globe Valve
u EB 5868 for Type 3213 and Type 3214 Globe Valves
u EB 8111 for Type 3321 Globe Valve
u EB 8113 for Type 3323 Three-way Valve
u EB 8131 for Type 3531 Globe Valve for Heat Transfer Oil
u EB 8135 for Type 3535 Three-way Valve for Heat Transfer Oil
u EB 3018 for Type 42-36 E Pressure-independent Control Valve (PICV) with electric
actuator
EB 5724 EN
Safety instructions and measures
1-3