Statistics - Samson TROVIS 5724-3 Mounting And Operating Instructions

Operation
8.6.5

Statistics

In the 'Service folder' ('Statistics'), various readings of counters are shown:
Device failures counters
Alarms counters
Binary signals counters
Memory pen counters
Functions counter
8-10
Supply voltage activated
Program interruptions
Limit contact error
EEPROM error
Signal failure at the temperature input
Signal failure at the current input
Flow rate exceeds measuring range
Upper limit GWH exceeded
Binary input activated
Switching output activated
Manual set point activated
Tapping
Command retract stem
Command extend stem
Data read
Data written
Data logged
Settings changed
Manual level activated
Zero calibration started
Reset triggered
Default settings loaded
Transit time measurement started
EB 5724 EN