Correcting Banding
Important
1
2
7-34
Troubleshooting
Follow the procedure below if you see white stripes or dark color stripes
appeared when printing on plain paper and correct banding. Before printing
a printhead alignment pattern, load A4 or Letter size paper in Cassette 1.
z Always load A4 or Letter sized paper in Cassette 1. If a smaller size is loaded, it
may smear ink inside the printer and onto other media.
z You do not need to select the media size on the operation panel. The media is force
fed from Cassette 1 to print the pattern.
Press the Power button to switch the printer on.
After a few seconds "Ready" is displayed in the operation panel and the
Online lamp lights.
Press the Online button to switch the Online lamp off.
The printer is set offline.
et Media
Cancel Job/
etup
Utility
Reset/Enter
Power
Online
Ink Replace
Online Message
et Media
Cancel Job/
etup
Utility
Reset/Enter
Power
Online
Ink Replace
Online Message