Canon W2200 User Manual page 41

4
Slide the lever to the left.
5
With the print surface (b) facing down, align the edge of the stack with
the right guide (a) then push the stack into the cassette until it stops.
When you insert the media, make sure that the trailing edge of the media is
located at the correct size mark on the tray.
Important
z To prevent misfeeds, make sure that the paper is not over the right guide (a).
z When loading the media that is wider than the media loaded in the cassette 1, you
must remove the previous media in the cassette and move the width guide. Move
the width guide to the A3+ size position. Not moving the guide may result in poor
medium supply.
b
a
2-19
Loading the Tray