Aligning The Printhead - Canon W2200 User Manual

Aligning the Printhead

If you notice broken vertical lines or deviation in colors in your prints, print
a printhead alignment patterns and align the printhead. Before printing a
printhead alignment pattern, load A4 or Letter size paper in Cassette 1.
Follow the procedure below to align the printhead.
Important
z Always load A4 or Letter sized paper in Cassette 1. If a smaller size is loaded, it
may smear ink inside the printer and onto other media.
z You do not need to select the media size on the operation panel. The media is force
fed from Cassette 1 to print the pattern.
1
Press the Power button to switch the printer on.
After a few seconds "Ready" is displayed in the operation panel and the
Online lamp lights.
2
Press the Online button to switch the Online lamp off.
The printer is set offline.
et Media
Cancel Job/
etup
Utility
Reset/Enter
Power
Online Ink Replace
Online Message
et Media
Cancel Job/
Utility etup
Reset/Enter
Power
Online Ink Replace
Online Message
Aligning the Printhead
7-31